12-05-2012, 12:30 PM | #1 |
Member
Join Date: May 2010
Location: Washington Iowa
Posts: 93
|
!!!!Spindles!!
City:
wash
State:
iowa
Price:
$10.00
I have 5 NOS front spindles, all are complete with early bearing cones, that should make them pre 1919, except 2 which are notched, which would make them post 1919, but they also have early cones and those 2 have a D in a circle on them??. All have bushings and are in good shelf condition, now the big one is they ARE ALL left hand. $10.00 each or trade all for a set of 26/27 spindles.
|
12-05-2012, 06:26 PM | #2 |
Senior Member
Join Date: May 2010
Location: Longbranch, Washington
Posts: 513
|
Re: !!!!Spindles!!
Left hand - sitting in the seat or standing in front looking at the front axle ?
|
Sponsored Links (Register now to hide all advertisements) |
|
12-05-2012, 09:39 PM | #3 |
Senior Member
Join Date: Dec 2011
Location: Two Rivers, Wi.
Posts: 1,406
|
Re: !!!!Spindles!!
Left hand thread would be on the passenger side... you never want the bearing to tighten with the wheel rotation. ws
__________________
" Warning; the following contains content that the anal retentive may find offensive - please skip on to the next posting!" |
12-06-2012, 05:54 PM | #4 |
Member
Join Date: May 2010
Location: Washington Iowa
Posts: 93
|
Re: !!!!Spindles!!
Left hand spindles as on the drivers side, which I believe is the accepted way of looking at them, left side has always been the drivers side????
|
12-06-2012, 06:23 PM | #5 |
Senior Member
Join Date: May 2010
Location: Longbranch, Washington
Posts: 513
|
Re: !!!!Spindles!!
Thanks !
|
12-06-2012, 06:31 PM | #6 |
Senior Member
Join Date: Dec 2011
Location: Two Rivers, Wi.
Posts: 1,406
|
Re: !!!!Spindles!!
Sponsored Links (Register now to hide all advertisements)
__________________
" Warning; the following contains content that the anal retentive may find offensive - please skip on to the next posting!" |
12-08-2012, 11:22 AM | #7 |
Member
Join Date: May 2010
Location: Washington Iowa
Posts: 93
|
Re: !!!!Spindles!!
|
12-08-2012, 03:56 PM | #8 |
Senior Member
Join Date: Dec 2011
Location: Two Rivers, Wi.
Posts: 1,406
|
Re: !!!!Spindles!!
YUP.... 'ol Hank sure liked tapers. almost as much as planetary gears. I think he thought outside the box but inside the triangle... Hmmm.
I think this parts list is exclusively pre 1926. These show the earlier style centered spindles; not the lowered ones. ws
__________________
" Warning; the following contains content that the anal retentive may find offensive - please skip on to the next posting!" |
|
|
Sponsored Links (Register now to hide all advertisements) |
|