|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-17-2022, 06:57 AM | #1 |
Junior Member
Join Date: Apr 2018
Posts: 16
|
1938 V8 1.5t Wheel Stud and Lug Nut
Friends,
Any idea where I can find a set of these in preferably in reverse thread? Looking for the larger size for the full 1.5t truck. Thank you, Tom |
07-17-2022, 07:26 AM | #2 |
Senior Member
Join Date: May 2010
Location: upstate SC
Posts: 2,963
|
Re: 1938 V8 1.5t Wheel Stud and Lug Nut
chuck's truck in conn. or barn find o8 on this web site
|
Sponsored Links (Register now to hide all advertisements) |
|
07-17-2022, 08:30 AM | #3 |
Senior Member
Join Date: Sep 2013
Location: SoCal-Redlands
Posts: 3,018
|
Re: 1938 V8 1.5t Wheel Stud and Lug Nut
Any large truck supply should be able to get Budd wheel nuts and studs in both right and left hand threads. Another source would be Michael at 3rd Gen Automotive:
https://thirdgenauto.com/ As a last resort I believe that Mac's list them.
__________________
Making the simple complicated for over 30 years. |
07-17-2022, 11:32 AM | #4 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,750
|
Re: 1938 V8 1.5t Wheel Stud and Lug Nut
Are the studs for front or rear?
|
07-17-2022, 12:46 PM | #5 |
Junior Member
Join Date: Apr 2018
Posts: 16
|
Re: 1938 V8 1.5t Wheel Stud and Lug Nut
for the front.
|
07-17-2022, 02:10 PM | #6 |
Senior Member
Join Date: May 2010
Location: Rochester, Il
Posts: 599
|
Re: 1938 V8 1.5t Wheel Stud and Lug Nut
Sponsored Links (Register now to hide all advertisements)
__________________
Stu McMillan Marmon-Herringtons |
07-17-2022, 03:59 PM | #7 |
Senior Member
Join Date: Jan 2011
Location: sw minnesota
Posts: 4,573
|
Re: 1938 V8 1.5t Wheel Stud and Lug Nut
Is this the big nut that takes a 1 1/2" wrench? I have a bunch of used ones from my ww2 dodge era. Free if you like
|
07-17-2022, 04:56 PM | #8 |
Senior Member
Join Date: May 2010
Location: Rochester, Il
Posts: 599
|
Re: 1938 V8 1.5t Wheel Stud and Lug Nut
Same as Dodge military nuts. Somebody near him probably has coffee cans full of them too that wouldn’t cost postage. Cadmium plated new from Napa (etc) wouldn’t be expensive though. Stu
__________________
Stu McMillan Marmon-Herringtons |
07-18-2022, 12:06 PM | #9 |
Junior Member
Join Date: Apr 2018
Posts: 16
|
Re: 1938 V8 1.5t Wheel Stud and Lug Nut
PM sent. Thank you!
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|