The Ford Barn

ebruns1 · 02-19-2016, 03:41 PM

Fellas,

I searched the forums and I don't come up with anything on this...did the 42-47 trucks have any kind of front or rear brackets? My front clip does not have any and I'm trying to picture how it gets mounted to the cab and frame. Typically there is a front bracket that bolts to the radiator U-mount on other trucks I've seen. Some (Dodges) have a rear bracket on the cab too. Does anyone have a sheet metal diagram by chance?

Jim

sunshine · 02-20-2016, 11:20 AM

MY 47 PKUP. HAS A BRACKET ON THE FRONT OF THE FRONT FENDER 8 INCHES LONG THAT BOLTS TO FRAME THRU A HOLE IN THE BUMPER BRACKET . THE REAR FENDER HAS A BRACE THAT GOES FROM THE REAR LIP TO THE FRAME ABOUT WHERE YOU WOOD HANG A MUD FLAP. I WISH I COULD SEND SOME PICTURES I HOPE THIS IS OF SOME HELP. I AM IN MD. IF YOU WOULD LIKE TO COME AND LOOK . [email protected] SUNSHINE

ebruns1 · 02-21-2016, 09:35 PM

That is a great help Sunshine as at least I know I need to search out more missing parts. If anyone has a part number, sketch or nomenclature on the front bracket I would be extremely grateful!

Jim

D. Jones · 02-22-2016, 10:09 AM

The inner fenders bolt to the radiator core support and the frame. The fenders bolt to the inner fenders, the nose piece, splash pan and the running boards. There is a small flat metal bracket that goes from the frame to the bottom front of the fender to keep the flexing under control. Hope this picture helps.

willowbilly3 · 02-22-2016, 11:07 AM

Quote:

Originally Posted by ebruns1

Fellas,

I searched the forums and I don't come up with anything on this...did the 42-47 trucks have any kind of front or rear brackets? My front clip does not have any and I'm trying to picture how it gets mounted to the cab and frame. Typically there is a front bracket that bolts to the radiator U-mount on other trucks I've seen. Some (Dodges) have a rear bracket on the cab too. Does anyone have a sheet metal diagram by chance?

Jim

I just dismantled a low mileage 47 2 months ago and I'm having a hard time visualizing the front fender brace you describe. The only brace on the front that I recall was this.

scooder · 02-22-2016, 02:36 PM

Sponsored Links (Register now to hide all advertisements)

Willow Billy,
The bracket you show is the one up the top of the fender area, bolts to the radiator support and the front panel, yes?
Like you, my pickup (1942) had no other brace for the front fenders. One for the rear fenders, but none for the front.
Martin.

ebruns1 · 02-22-2016, 06:45 PM

Oh no...I definitely do not have a set of Willowbilly's brackets in the parts I got with the truck. Anyone happen to have an exploded schematic with parts numbers they could post to help us? Sounds like a few others are in the same boat.
Great photo D Jones! Your truck looks fantastic. I don't see that bracket in the photo, but it is still very helpful to see yours going back together!!! Man I'm jealous!

willowbilly3 · 02-22-2016, 08:23 PM

Quote:

Originally Posted by scooder

Willow Billy,
The bracket you show is the one up the top of the fender area, bolts to the radiator support and the front panel, yes?
Like you, my pickup (1942) had no other brace for the front fenders. One for the rear fenders, but none for the front.
Martin.

Yes

will.rynerson · 11-22-2021, 08:42 PM

Quote:

Originally Posted by scooder

Willow Billy,
The bracket you show is the one up the top of the fender area, bolts to the radiator support and the front panel, yes?
Like you, my pickup (1942) had no other brace for the front fenders. One for the rear fenders, but none for the front.
Martin.

Hi all,

I’m to figure how these connect. Do they go on before the fender or can they go on after?

mercman from oz · 11-22-2021, 08:56 PM

42-47 Ford truck front fender brackets by D Jones

will.rynerson · 11-22-2021, 09:06 PM

I’m trying to figure out where these (see the picture below) go. A picture is worth a thousand word. But…. :-)

will.rynerson · 11-23-2021, 08:55 PM

Just in case someone else needs help figuring where exactly these go. Make sure you put these on before the fenders go on.

mercman from oz · 11-24-2021, 05:15 AM

will.rynerson is trying to figure out where these parts go?

mercman from oz · 11-24-2021, 05:22 AM

will.rynerson suggests:- " Make sure you put these on before the fenders go on."

Doublepumper · 11-24-2021, 01:03 PM

Some pics...passenger side front and rear.

mercman from oz · 11-25-2021, 01:30 AM

Some pictures...passenger side front and rear - from Doublepumper

GB SISSON · 11-25-2021, 11:38 AM

I have four jailbar trucks and I still get confused by the pile of small parts that are left over when I assemble the front sheet metal. I would love to save this thread as a great reference! That rear fender brace is rarely intact as it catches all the mud and salt . I have found that a galvanized strap on power pole cross-arms can be easily bent with a bit of heat to create a new and basically permanent fender brace. And they already have a 3/8" hole at each end!

will.rynerson · 11-25-2021, 01:51 PM

Well,

I figured out where the heavy duty front brackets go. See pictures.

Thanks for all the help and searching.

GB SISSON · 11-25-2021, 03:05 PM

Will, were there coil springs with those brackets? From memory seems like A spring and long castelated bolt at one end?

petehoovie · 11-25-2021, 03:08 PM

Quote:

Originally Posted by will.rynerson

Well,

I figured out where the heavy duty front brackets go. See pictures.

Thanks for all the help and searching.

02-19-2016, 03:41 PM	#1
ebruns1 Member Join Date: Feb 2014 Location: New Hope, PA Posts: 57	42-47 truck front fender brackets? Fellas, I searched the forums and I don't come up with anything on this...did the 42-47 trucks have any kind of front or rear brackets? My front clip does not have any and I'm trying to picture how it gets mounted to the cab and frame. Typically there is a front bracket that bolts to the radiator U-mount on other trucks I've seen. Some (Dodges) have a rear bracket on the cab too. Does anyone have a sheet metal diagram by chance? Jim

02-20-2016, 11:20 AM	#2
sunshine Senior Member Join Date: Feb 2011 Location: SUNSHINE MD. Posts: 318	Re: 42-47 truck front fender brackets? MY 47 PKUP. HAS A BRACKET ON THE FRONT OF THE FRONT FENDER 8 INCHES LONG THAT BOLTS TO FRAME THRU A HOLE IN THE BUMPER BRACKET . THE REAR FENDER HAS A BRACE THAT GOES FROM THE REAR LIP TO THE FRAME ABOUT WHERE YOU WOOD HANG A MUD FLAP. I WISH I COULD SEND SOME PICTURES I HOPE THIS IS OF SOME HELP. I AM IN MD. IF YOU WOULD LIKE TO COME AND LOOK . [email protected] SUNSHINE

02-21-2016, 09:35 PM	#3
ebruns1 Member Join Date: Feb 2014 Location: New Hope, PA Posts: 57	Re: 42-47 truck front fender brackets? That is a great help Sunshine as at least I know I need to search out more missing parts. If anyone has a part number, sketch or nomenclature on the front bracket I would be extremely grateful! Jim

02-22-2016, 02:36 PM	#6
scooder Senior Member Join Date: Jul 2010 Posts: 2,593	Re: 42-47 truck front fender brackets? Sponsored Links (Register now to hide all advertisements) Willow Billy, The bracket you show is the one up the top of the fender area, bolts to the radiator support and the front panel, yes? Like you, my pickup (1942) had no other brace for the front fenders. One for the rear fenders, but none for the front. Martin.

02-22-2016, 06:45 PM	#7
ebruns1 Member Join Date: Feb 2014 Location: New Hope, PA Posts: 57	Re: 42-47 truck front fender brackets? Oh no...I definitely do not have a set of Willowbilly's brackets in the parts I got with the truck. Anyone happen to have an exploded schematic with parts numbers they could post to help us? Sounds like a few others are in the same boat. Great photo D Jones! Your truck looks fantastic. I don't see that bracket in the photo, but it is still very helpful to see yours going back together!!! Man I'm jealous!

11-22-2021, 08:56 PM	#10
mercman from oz Senior Member Join Date: May 2012 Location: Queensland, Australia Posts: 10,361	Re: 42-47 truck front fender brackets? 42-47 Ford truck front fender brackets by D Jones

11-24-2021, 05:15 AM	#13
mercman from oz Senior Member Join Date: May 2012 Location: Queensland, Australia Posts: 10,361	Re: 42-47 truck front fender brackets? will.rynerson is trying to figure out where these parts go?

11-24-2021, 05:22 AM	#14
mercman from oz Senior Member Join Date: May 2012 Location: Queensland, Australia Posts: 10,361	Re: 42-47 truck front fender brackets? will.rynerson suggests:- " Make sure you put these on before the fenders go on."

11-25-2021, 01:30 AM	#16
mercman from oz Senior Member Join Date: May 2012 Location: Queensland, Australia Posts: 10,361	Re: 42-47 truck front fender brackets? Some pictures...passenger side front and rear - from Doublepumper

11-25-2021, 11:38 AM	#17
GB SISSON Senior Member Join Date: Jan 2014 Location: Orcas Island Washington Posts: 4,916	Re: 42-47 truck front fender brackets? I have four jailbar trucks and I still get confused by the pile of small parts that are left over when I assemble the front sheet metal. I would love to save this thread as a great reference! That rear fender brace is rarely intact as it catches all the mud and salt . I have found that a galvanized strap on power pole cross-arms can be easily bent with a bit of heat to create a new and basically permanent fender brace. And they already have a 3/8" hole at each end! __________________ Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1947 Tonner Pickup (red) mostly stock with exception of a cummins 6at turbo diesel, 1946 Tonner Pickup (green) with 226 cu in 6 cyl flathead, 1979 Toyota landcruiser wagon, completely encased in 1947 Ford Jailbar sheet metal. Ok, cornbinder rear fenders..... 'Rusty ol' floorboards, hot on their feet' (Alan Jackson)

11-25-2021, 03:05 PM	#19
GB SISSON Senior Member Join Date: Jan 2014 Location: Orcas Island Washington Posts: 4,916	Re: 42-47 truck front fender brackets? Will, were there coil springs with those brackets? From memory seems like A spring and long castelated bolt at one end? __________________ Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1947 Tonner Pickup (red) mostly stock with exception of a cummins 6at turbo diesel, 1946 Tonner Pickup (green) with 226 cu in 6 cyl flathead, 1979 Toyota landcruiser wagon, completely encased in 1947 Ford Jailbar sheet metal. Ok, cornbinder rear fenders..... 'Rusty ol' floorboards, hot on their feet' (Alan Jackson)