Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 11-01-2014, 06:15 PM   #21
Tod
Senior Member
 
Join Date: Mar 2014
Location: Salem, Ohio
Posts: 1,058
Default Re: New block machining.

Quote:
Originally Posted by mshmodela View Post
Awesome Tod! So any data on once a few blocks have been fully made and used in a running engine what might be the demand for them? What the retail cost of finished block (ready for assembly) might be?
Mike,

I'm not sure what demand will be. Some think hundreds, some think thousands, some, like me, don't know what to expect. I am shooting for 'ready-to-assemble' blocks under $2500.00. The closer to $2000.00 the better. One of my goals is to make searching through several bad blocks for a good block such a waste of time and money that the old junk will become completely undesirable.

Added by edit: Mike, going by the initial polling, it seems that I may be able to have some 200 customers right off the bat. One of my builders says people are just waiting for this to get into production so they do not have to try finding a buildable block. Several people have told me privately that they want more than 1 so who knows what the numbers might end up being. My friend says he would like to see machining quantities of at least 50 at a time. So, hopefully, that is repeated often.

Tod

Last edited by Tod; 11-01-2014 at 06:40 PM.
Tod is offline   Reply With Quote
Old 11-02-2014, 10:11 AM   #22
Tod
Senior Member
 
Join Date: Mar 2014
Location: Salem, Ohio
Posts: 1,058
Default Re: New block machining.

Quote:
Originally Posted by Chris Haynes View Post
Paul,
The "Other" one has already done 25 test castings. Now looking for a foundry to pour them in mass. I am sure Tod would agree this is not a race to see who will be first. But more about making a quality product. Both men are devoted to their cause.
Being familiar with Globe's work and capacity I do not see why they could not make a simple block casting in mass quantities. They are members of the AFS (for which I have lectured) and DIS. If they can't make a block nobody can.

And, no, I'm not in a race with anyone. As I said before, I think Terry and I are targeting two different markets.

Tod
Tod is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 11-02-2014, 10:18 AM   #23
mshmodela
Senior Member
 
mshmodela's Avatar
 
Join Date: Mar 2014
Location: Cleveland, Ohio
Posts: 2,763
Default Re: New block machining.

$2k seems about what I was guessing it might be given the price of new head...
__________________
-Mike

Late 31' Ford Model A Tudor, Miss Daisy

I don't work on cars --I'm learning about my Model A.

Cleveland, Ohio
mshmodela is offline   Reply With Quote
Old 11-02-2014, 01:22 PM   #24
hardtimes
Senior Member
 
hardtimes's Avatar
 
Join Date: May 2010
Location: South California
Posts: 6,188
Default Re: New block machining.

Quote:
Originally Posted by mshmodela View Post
$2k seems about what I was guessing it might be given the price of new head...
I agree. I just had a B block machined 'here/there' and REPAIRED/BRAZED, mainly in the valve seat areas....and was NOT a happy camper with the cost. Heck, I think that my block was in better shape than some I've seen repaired. To have a NEW B block , from NEW metal compound and machined with NEW technology (with 5x5 B innards ) for your price projections equals no brainer decision !

Last edited by hardtimes; 11-02-2014 at 01:25 PM. Reason: /
hardtimes is offline   Reply With Quote
Old 11-02-2014, 07:05 PM   #25
CarlG
Senior Member
 
CarlG's Avatar
 
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,109
Default Re: New block machining.

My question still looms: Where are the 5 main cranks going to come from?
__________________
Alaskan A's
Antique Auto Mushers of Alaska
Model A Ford Club of America
Model A Restorers Club
Antique Automobile Club of America
Mullins Owner's Club
CarlG is offline   Reply With Quote
Old 11-02-2014, 07:12 PM   #26
Tod
Senior Member
 
Join Date: Mar 2014
Location: Salem, Ohio
Posts: 1,058
Default Re: New block machining.

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by CarlG View Post
My question still looms: Where are the 5 main cranks going to come from?
My worry right now, if you want to call it worry, is making blocks for people that want them. I never said I would make cranks so I figure people asking me for a 5x5 block have a crank already. If I have to I can surely make a crank. Done it before.

Tod
Tod is offline   Reply With Quote
Old 11-02-2014, 07:35 PM   #27
CarlG
Senior Member
 
CarlG's Avatar
 
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,109
Default Re: New block machining.

I applaud your dedication to making a new block and have followed your progress with much interest. And right at this minute, I am in the market for not just a block, but for a complete working engine. Just not sure where all the needed and necessary parts will come from to make me a "new" engine. Just trying to put 2 and 2 together.
__________________
Alaskan A's
Antique Auto Mushers of Alaska
Model A Ford Club of America
Model A Restorers Club
Antique Automobile Club of America
Mullins Owner's Club
CarlG is offline   Reply With Quote
Old 11-02-2014, 10:25 PM   #28
CWPASADENA
Senior Member
 
CWPASADENA's Avatar
 
Join Date: May 2010
Location: PASADENA, CA
Posts: 1,882
Default Re: New block machining.

Hi Tod;

Good to hear that things are progressing,

I will need crank, cam or at least a cam blank.

How about rods? Hopefully the rod throws can be Model "B" size?

I will need all the internals.

Chris W.
CWPASADENA is offline   Reply With Quote
Old 11-03-2014, 06:21 AM   #29
Chris Haynes
Senior Member
 
Chris Haynes's Avatar
 
Join Date: May 2010
Location: Camarillo, CA and Pine Grove, CA
Posts: 2,830
Default Re: New block machining.

Quote:
Originally Posted by CarlG View Post
My question still looms: Where are the 5 main cranks going to come from?
Terry is casting the 5 main cranks and the H beam rods.

The engine Terry is doing is different than Tod's. Where Tod's is a replacement Terry's is much different than original. Apples and oranges so to speak.

The Burtz 5 main crank will not work in a stock A engine. It uses Small Block Chevrolet main and rod bearings.
__________________
1921 Runabout
1930 Tudor
Early 1930 AA
Speed costs money. How fast do you want to go?

Last edited by Chris Haynes; 11-09-2014 at 12:57 AM.
Chris Haynes is offline   Reply With Quote
Old 11-03-2014, 06:47 AM   #30
BRENT in 10-uh-C
Senior Member
 
BRENT in 10-uh-C's Avatar
 
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,487
Default Re: New block machining.

Quote:
Originally Posted by CarlG View Post
My question still looms: Where are the 5 main cranks going to come from?
Carl, guys have retrofitted a crankshaft from a Hercules engine that has 5 mains however another option (better??) is to have SCAT manufacture a complete new billet crank. It would take them modifying their CNC program but I doubt it would add more than $400-$500 more to the price of their present cranks.

This definitely makes everything available to assemble an engine with all brand new parts manufactured in the 21st century.
__________________
.

BRENT in 10-uh-C
.
www.model-a-ford.com
...(...Finally Updated!! )

.
BRENT in 10-uh-C is offline   Reply With Quote
Old 11-03-2014, 02:23 PM   #31
Pete
Senior Member
 
Pete's Avatar
 
Join Date: May 2010
Location: Wa.
Posts: 5,374
Default Re: New block machining.

Quote:
Originally Posted by BRENT in 10-uh-C View Post
Carl, guys have retrofitted a crankshaft from a Hercules engine that has 5 mains however another option (better??) is to have SCAT manufacture a complete new billet crank. It would take them modifying their CNC program but I doubt it would add more than $400-$500 more to the price of their present cranks.

This definitely makes everything available to assemble an engine with all brand new parts manufactured in the 21st century.
Just speculating but if SCAT were to make a model A/B crank it would most likely be cast like their flathead V8 cranks are. It's a cost thing.
If you want a billet crank, Moldex or Crower are probably the best options right now. I have used Moldex over the years and you can't do any better.

My thoughts are that when people find out what the final cost of a 5 x 5 engine is it will become a lot less attractive.
These after market blocks will probably never be legal to run in vintage competition other than "time only".
I see them as the best thing that has come along for a touring engine though.
Pete is offline   Reply With Quote
Old 11-03-2014, 03:25 PM   #32
CarlG
Senior Member
 
CarlG's Avatar
 
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,109
Default Re: New block machining.

Just curious if any of the Engine Builders have expressed an interest in completing these blocks into short or long block engines? (Rich Fallucca, James Rogers, Ron Kelley, etc.)
__________________
Alaskan A's
Antique Auto Mushers of Alaska
Model A Ford Club of America
Model A Restorers Club
Antique Automobile Club of America
Mullins Owner's Club
CarlG is offline   Reply With Quote
Old 11-03-2014, 03:42 PM   #33
Mitch//pa
BANNED
 
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
Default Re: New block machining.

i agree with where Carl is coming from.. many of us just want to purchase a ready made long or short block through a supplier with a warranty and not get involved in building it ourselves. my guess this is down the road a little
Mitch//pa is offline   Reply With Quote
Old 11-03-2014, 04:57 PM   #34
Tod
Senior Member
 
Join Date: Mar 2014
Location: Salem, Ohio
Posts: 1,058
Default Re: New block machining.

Anyone with an Integrex 200 model 5 axis lathe can make a 5 main billet crank. The cost of the 5x5 engine is such that my approach started with the most cost effective and popular direction first. Snyder steered me in the direction of the stock A block and the polls made me add B internal capacity. My guess is stock A is where my main market will be.

And, so far, the only builder that has discussed building engines with my blocks is Kevin Prus Jr., who builds motors for Snyder. That may jut be how some will get their motors.

Tod
Tod is offline   Reply With Quote
Old 11-03-2014, 05:47 PM   #35
Pete
Senior Member
 
Pete's Avatar
 
Join Date: May 2010
Location: Wa.
Posts: 5,374
Default Re: New block machining.

Quote:
Originally Posted by Tod View Post
Anyone with an Integrex 200 model 5 axis lathe can make a 5 main billet crank. The cost of the 5x5 engine is such that my approach started with the most cost effective and popular direction first. Snyder steered me in the direction of the stock A block and the polls made me add B internal capacity. My guess is stock A is where my main market will be.

And, so far, the only builder that has discussed building engines with my blocks is Kevin Prus Jr., who builds motors for Snyder. That may jut be how some will get their motors.

Tod
That is true about the 5 axis lathe, BUT, I have made several cranks from SAE 6150 on a plain jane 18 inch Cinnicinati lathe.
Pete is offline   Reply With Quote
Old 11-03-2014, 06:25 PM   #36
Crazydaddyo
Senior Member
 
Crazydaddyo's Avatar
 
Join Date: May 2010
Location: Orange, Ca.
Posts: 197
Default Re: New block machining.

Quote:
Originally Posted by Pete View Post
Just speculating but if SCAT were to make a model A/B crank it would most likely be cast like their flathead V8 cranks are. It's a cost thing.

Scat makes a crank for the 3 main A/B engine now. It is forged.

http://www.scatcrankshafts.com/#1


Crazydaddyo is offline   Reply With Quote
Old 11-03-2014, 08:34 PM   #37
Pete
Senior Member
 
Pete's Avatar
 
Join Date: May 2010
Location: Wa.
Posts: 5,374
Default Re: New block machining.

Quote:
Originally Posted by Crazydaddyo View Post
Scat makes a crank for the 3 main A/B engine now. It is forged.

http://www.scatcrankshafts.com/#1




Far out.
Pete is offline   Reply With Quote
Old 11-03-2014, 08:51 PM   #38
Rex_A_Lott
Senior Member
 
Join Date: Jun 2011
Location: Upstate South Carolina
Posts: 794
Default Re: New block machining.

Quote:
Originally Posted by Pete View Post
That is true about the 5 axis lathe, BUT, I have made several cranks from SAE 6150 on a plain jane 18 inch Cinnicinati lathe.
My guess is that you might be the best source for the 5 bearing cam too.
I'm pretty sure you CAN do it, just not sure you'd WANT to...
I think I know that most roller tappet stuff is made from billet, so carving the 5 bearing cam for the A/B shouldnt be a big deal, once the setup program is overcome, but how many is enough to make it worth it, cost=wise?
I don't have a clue about that, but I'm sure its a question that has to have a good answer before anybody is going to jump in and start grinding.
I'm watching this, curious about the internals also. Hope it takes off.
Good Luck, Tod.
Rex_A_Lott is offline   Reply With Quote
Old 11-03-2014, 09:58 PM   #39
Pete
Senior Member
 
Pete's Avatar
 
Join Date: May 2010
Location: Wa.
Posts: 5,374
Default Re: New block machining.

Quote:
Originally Posted by Rex_A_Lott View Post
My guess is that you might be the best source for the 5 bearing cam too.
I'm pretty sure you CAN do it, just not sure you'd WANT to...
I think I know that most roller tappet stuff is made from billet, so carving the 5 bearing cam for the A/B shouldnt be a big deal, once the setup program is overcome, but how many is enough to make it worth it, cost=wise?
I don't have a clue about that, but I'm sure its a question that has to have a good answer before anybody is going to jump in and start grinding.
I'm watching this, curious about the internals also. Hope it takes off.
Good Luck, Tod.
It would be FAR more practical just install two bolt in cam bearing blocks in the block and grind the appropriate area on the cam. This has been done many times.

There is another alternative also if you have a back yard machine shop.
This cam started out a stock model A core. It has 5 oversize journals
and .488 lift. Lots of welding required but the overall cost of the finished product was about 10% cheaper than a bar stock billet.
Attached Images
File Type: jpg 4 banger cam.jpg (12.6 KB, 68 views)
Pete is offline   Reply With Quote
Old 11-03-2014, 11:23 PM   #40
CarlG
Senior Member
 
CarlG's Avatar
 
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,109
Default Re: New block machining.

Aren't Bill Stipe's cams already 5 bearing cams?
__________________
Alaskan A's
Antique Auto Mushers of Alaska
Model A Ford Club of America
Model A Restorers Club
Antique Automobile Club of America
Mullins Owner's Club
CarlG is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 09:59 AM.