The Ford Barn

1oldtimer · 07-23-2014, 09:37 PM

Anyone near Hewitt, New Jersey that might be able to get and hold a small 4 cyl motor that's apart. Hold it until I can get a shipper to get it. It's not a 100% done deal yet, just trying to get everything together and see if it's feasible.

Thanks

keith oh · 07-24-2014, 02:14 PM

You are not very clear on what you want but I have a small 4 cyl motor. It is the first motor Ford used in their First Pinto, the one with push rod overhead valves. I think the English used them first. The trouble is I am in Millersport Ohio but only 3 miles South of interstate 70.

paul2748 · 07-24-2014, 08:56 PM

I'm near Hewitt and could hold it for you. No way to crate it though.

Paul 201-six5two-70twoseven

keith oh · 07-25-2014, 09:53 AM

Sorry, this old Octogenarian miss understood your question.

1oldtimer · 07-26-2014, 03:34 AM

Sponsored Links (Register now to hide all advertisements)

I re read my post and it does sound a little off...sorry. I was looking for some real close to pick it up and hold onto it until I could get a HAMB/Fordbarn transporter, but it looks like none of them will be going that way for a little while. It's an off topic motor (turbo pinto) and in pieces. The Ebayer said he could take it to UPS but for them to crate it and ship it would be way more then the purchase price. I think it's going to be a dead end.

Keith the motor you have is a 1.6 liter "Kent" pinto motor. They still use that in Formula Ford racing.

07-23-2014, 09:37 PM	#1
1oldtimer Senior Member Join Date: May 2010 Location: South Orange County, Ca. Posts: 685	Hewitt, New Jersey Anyone near Hewitt, New Jersey that might be able to get and hold a small 4 cyl motor that's apart. Hold it until I can get a shipper to get it. It's not a 100% done deal yet, just trying to get everything together and see if it's feasible. Thanks

07-24-2014, 02:14 PM	#2
keith oh Senior Member Join Date: May 2010 Location: Millersport, central ohio Posts: 668	Re: Hewitt, New Jersey You are not very clear on what you want but I have a small 4 cyl motor. It is the first motor Ford used in their First Pinto, the one with push rod overhead valves. I think the English used them first. The trouble is I am in Millersport Ohio but only 3 miles South of interstate 70.

07-24-2014, 08:56 PM	#3
paul2748 Senior Member Join Date: May 2010 Location: Midland Park, NJ Posts: 3,978	Re: Hewitt, New Jersey I'm near Hewitt and could hold it for you. No way to crate it though. Paul 201-six5two-70twoseven

07-25-2014, 09:53 AM	#4
keith oh Senior Member Join Date: May 2010 Location: Millersport, central ohio Posts: 668	Re: Hewitt, New Jersey Sorry, this old Octogenarian miss understood your question.

07-26-2014, 03:34 AM	#5
1oldtimer Senior Member Join Date: May 2010 Location: South Orange County, Ca. Posts: 685	Re: Hewitt, New Jersey Sponsored Links (Register now to hide all advertisements) I re read my post and it does sound a little off...sorry. I was looking for some real close to pick it up and hold onto it until I could get a HAMB/Fordbarn transporter, but it looks like none of them will be going that way for a little while. It's an off topic motor (turbo pinto) and in pieces. The Ebayer said he could take it to UPS but for them to crate it and ship it would be way more then the purchase price. I think it's going to be a dead end. Keith the motor you have is a 1.6 liter "Kent" pinto motor. They still use that in Formula Ford racing.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode