|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-02-2014, 07:06 PM | #1 |
Senior Member
Join Date: Jun 2012
Location: Central NH
Posts: 192
|
59 AB engine rebuild
Thanks to everyone's help, I have successfully removed the engine and transmission from my 1936 panel delivery with a 59AB engine.
It's going to be a long process, working full time during the week slows things down. I figured I would keep all of my engine related questions in this thread. The engine is stuck and this past weekend I realized that I would have a very hard time removing the pistons if I couldn't rotate the crankshaft. From looking at the engine I thought that it wasn't the pistons stuck but the valve lifters that were causing the problem because of how rusty they are. I took off the timing cover and removed the cam shaft gear and then I was able to rotate the crankshaft. Now I am trying to remove the oil pump and it doesn't seem to want to come out. I removed the one bolt at the bottom of the oil pump (If engine is upside down) Is there anything else I need to remove to get the whole pump out? |
|
|
Sponsored Links (Register now to hide all advertisements) |
|