The Ford Barn

Billybob57 · 01-30-2022, 08:57 PM

I own a 1930 Tudor . It was made in August. The emergency brake cross shaft sets between the frame rails. In the red book it says there should be a grease zert on the outside of the frame rail on each side of the cross shaft. But there isn't. There isn't even a hole for one. Has anyone seen this before?

31Tudor · 01-31-2022, 09:33 AM

The brake shaft change that you have was made in May 1930. Your August build would have the cross shaft you described. That style did not have grease fitting.

Billybob57 · 01-31-2022, 11:38 AM

Sponsored Links (Register now to hide all advertisements)

Thank you. I thought I had an odd ball!

01-30-2022, 08:57 PM	#1
Billybob57 Member Join Date: Sep 2021 Location: Michigan Posts: 66	1930 Todor emergency brake cross shaft I own a 1930 Tudor . It was made in August. The emergency brake cross shaft sets between the frame rails. In the red book it says there should be a grease zert on the outside of the frame rail on each side of the cross shaft. But there isn't. There isn't even a hole for one. Has anyone seen this before?

01-31-2022, 09:33 AM	#2
31Tudor Senior Member Join Date: May 2010 Location: North Carolina Posts: 611	Re: 1930 Todor emergency brake cross shaft The brake shaft change that you have was made in May 1930. Your August build would have the cross shaft you described. That style did not have grease fitting.

01-31-2022, 11:38 AM	#3
Billybob57 Member Join Date: Sep 2021 Location: Michigan Posts: 66	Re: 1930 Todor emergency brake cross shaft Sponsored Links (Register now to hide all advertisements) Thank you. I thought I had an odd ball!