The Ford Barn

Graham Freeman · 09-05-2022, 03:23 AM

I have found these parts amongst my stash of 1934 parts.
These I am sure are not 34 parts and would like some help in identifying them please.
Dimensions are shown.
Thanks
GrahamIMG_4567.JPG

mercman from oz · 09-05-2022, 03:59 AM

Ford Parts that Graham needs identified

deuce lover · 09-05-2022, 05:32 AM

Bottom 3 are anti chatter rods.The short one is strange. The top one is a radiator brace rod ? 2nd from top -I'm not sure.

DavidG · 09-05-2022, 09:31 AM

The bottom anti-chatter rod is for '33-'34 four cylinder. I need to measure what I have to make sure on the others, which I will do later today or tomorrow.

Graham Freeman · 09-07-2022, 03:59 AM

Thanks David I await your response.

Terry,OH · 09-07-2022, 09:51 AM

Sponsored Links (Register now to hide all advertisements)

33-34 engine anti chatter rods are not taped with a screw thread, they are attached with a through bolt and nut.

DavidG · 09-07-2022, 10:40 AM

Graham,

Sorry for the delay; on top of that I can't add to what I indicated earlier except to note that neither of the radiator support rods are '32 to '34 (four or V8) and that neither of the other two anti-chatter rods are '33-'36. If you learn the identity of the 29 1/8" long radiator support rod, please let me know as I have a bunch of them, mostly NOS.

Terry,OH · 09-07-2022, 12:05 PM

Radiator support rods:
28-31 A-8133-A2 26”
32 V8 18-8133 29 ¾”
32 4Cyl. B-8133 30 3/8”
33-34 40-8133 31 1/8”
35 early large tank 48-8133 28 ½”
35 small tank 48-8113-AR 32 ¾” (was 48-8133)
35 late small tank 48-8133-B 31 ¾” (32 13/32” or 32 1/8”)
68-8113-A 29 ¼”
36-39 Exc. 39 Dlx. 68-8133-B 29 ½”
50-8133 29 1/8 to 29 ¼” Models 51-Dump body, 67-Pick up,112” commercial)

09-05-2022, 03:23 AM	#1
Graham Freeman Senior Member Join Date: May 2010 Location: New Zealand Posts: 298	Parts identification I have found these parts amongst my stash of 1934 parts. These I am sure are not 34 parts and would like some help in identifying them please. Dimensions are shown. Thanks GrahamIMG_4567.JPG

09-05-2022, 03:59 AM	#2
mercman from oz Senior Member Join Date: May 2012 Location: Queensland, Australia Posts: 10,377	Re: Parts identification Ford Parts that Graham needs identified

09-05-2022, 05:32 AM	#3
deuce lover Senior Member Join Date: May 2010 Location: Southern France Posts: 5,307	Re: Parts identification Bottom 3 are anti chatter rods.The short one is strange. The top one is a radiator brace rod ? 2nd from top -I'm not sure.

09-05-2022, 09:31 AM	#4
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,102	Re: Parts identification The bottom anti-chatter rod is for '33-'34 four cylinder. I need to measure what I have to make sure on the others, which I will do later today or tomorrow.

09-07-2022, 03:59 AM	#5
Graham Freeman Senior Member Join Date: May 2010 Location: New Zealand Posts: 298	Re: Parts identification Thanks David I await your response.

09-07-2022, 09:51 AM	#6
Terry,OH Senior Member Join Date: May 2010 Posts: 4,751	Re: Parts identification Sponsored Links (Register now to hide all advertisements) 33-34 engine anti chatter rods are not taped with a screw thread, they are attached with a through bolt and nut.

09-07-2022, 10:40 AM	#7
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,102	Re: Parts identification Graham, Sorry for the delay; on top of that I can't add to what I indicated earlier except to note that neither of the radiator support rods are '32 to '34 (four or V8) and that neither of the other two anti-chatter rods are '33-'36. If you learn the identity of the 29 1/8" long radiator support rod, please let me know as I have a bunch of them, mostly NOS.

09-07-2022, 12:05 PM	#8
Terry,OH Senior Member Join Date: May 2010 Posts: 4,751	Re: Parts identification Radiator support rods: 28-31 A-8133-A2 26” 32 V8 18-8133 29 ¾” 32 4Cyl. B-8133 30 3/8” 33-34 40-8133 31 1/8” 35 early large tank 48-8133 28 ½” 35 small tank 48-8113-AR 32 ¾” (was 48-8133) 35 late small tank 48-8133-B 31 ¾” (32 13/32” or 32 1/8”) 68-8113-A 29 ¼” 36-39 Exc. 39 Dlx. 68-8133-B 29 ½” 50-8133 29 1/8 to 29 ¼” Models 51-Dump body, 67-Pick up,112” commercial)