|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-10-2022, 12:16 PM | #1 |
Member
Join Date: Apr 2022
Location: So, NH
Posts: 95
|
Distributor identification
I have 2 distributors, the one on the right I just pulled from my 34. The one on the left has been rebuilt, I thought I was going to use it on the 34 till I discovered it has 4 mounting bolts and a 2 bolt coil.. I am thinking it's for a 40 since dad had a 40 also. Can anyone confirm its a 40?
Thanks Terry |
08-10-2022, 12:39 PM | #2 |
Senior Member
Join Date: May 2010
Location: Southern France
Posts: 5,302
|
Re: Distributor identification
The one on the left is 37-41.
|
Sponsored Links (Register now to hide all advertisements) |
|
08-10-2022, 02:08 PM | #3 |
Senior Member
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,526
|
Re: Distributor identification
|
08-10-2022, 02:12 PM | #4 |
Member
Join Date: Apr 2022
Location: So, NH
Posts: 95
|
Re: Distributor identification
So both can be used on the 34?
|
08-10-2022, 02:20 PM | #5 |
Senior Member
Join Date: May 2010
Location: Southern France
Posts: 5,302
|
Re: Distributor identification
Yes but you need the coil and condenser that goes with it.
|
08-10-2022, 02:25 PM | #6 | |
Senior Member
Join Date: May 2015
Posts: 8,081
|
Re: Distributor identification
Sponsored Links (Register now to hide all advertisements)
Quote:
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
|
08-10-2022, 02:38 PM | #7 |
Senior Member
Join Date: May 2010
Posts: 191
|
Re: Distributor identification
The inner terminal caps are also different.
Keith |
08-10-2022, 02:48 PM | #8 |
Member
Join Date: Apr 2022
Location: So, NH
Posts: 95
|
Re: Distributor identification
With the inner rotor being different, my guess is that he rebuilt it for the 40. I have cleaned up what I took out, found the condensor bad and the coil lead to the resistor lose. I'll put it back together next week and hope forthe best. Thanks for the help.
|
08-10-2022, 02:56 PM | #9 |
Senior Member
Join Date: May 2015
Posts: 8,081
|
Re: Distributor identification
'37 - '41 four hole distributor with two bolt coil...
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
|
|
Sponsored Links (Register now to hide all advertisements) |
|