|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-06-2012, 01:50 PM | #1 |
Senior Member
Join Date: Dec 2011
Location: Two Rivers, Wi.
Posts: 1,406
|
Model A differential parts
City:
two rivers
State:
wi
Price:
in ad
Took apart a Model A differential that had been a trailer. Axles were saw cut to facilitate dis-assembly, therefore the carrier is complete and intact. Parts are as removed, plus UPS ground from 54241 ws 6303888882
Carrier with ring gear, bearings and spider gears $25 Center housing $15 Rear hubs with bearings and seals, tapers good. Both $25 Both rear backing plates complete (small inner part on one slightly damaged) $15
__________________
" Warning; the following contains content that the anal retentive may find offensive - please skip on to the next posting!" |
11-07-2012, 06:38 PM | #2 |
Senior Member
Join Date: Dec 2011
Location: Two Rivers, Wi.
Posts: 1,406
|
Re: Model A differential parts
BTTT
Everything for $50 plus shipping. Ring gear looks good. Hub flanges are different. Look closely. I dont know the difference. Carrier was washed in solvent and greased bearings to stay together. ws
__________________
" Warning; the following contains content that the anal retentive may find offensive - please skip on to the next posting!" |
Sponsored Links (Register now to hide all advertisements) |
|
11-07-2012, 09:22 PM | #3 |
Member
Join Date: Jun 2012
Location: miles city, mt.
Posts: 40
|
Re: Model A differential parts
do you have the pinion gear?
|
11-08-2012, 12:10 AM | #4 |
Senior Member
Join Date: Dec 2011
Location: Two Rivers, Wi.
Posts: 1,406
|
Re: Model A differential parts
No pinion gear... as is or was; its came from a trailer. ws
__________________
" Warning; the following contains content that the anal retentive may find offensive - please skip on to the next posting!" |
11-08-2012, 07:40 PM | #5 |
Senior Member
Join Date: Dec 2011
Location: Two Rivers, Wi.
Posts: 1,406
|
Re: Model A differential parts
Parts are available seperately as well. Hate to make KIA frames from this stuff! ws
__________________
" Warning; the following contains content that the anal retentive may find offensive - please skip on to the next posting!" |
11-10-2012, 02:14 PM | #6 |
Senior Member
Join Date: Dec 2011
Location: Two Rivers, Wi.
Posts: 1,406
|
Re: Model A differential parts
Sponsored Links (Register now to hide all advertisements)
__________________
" Warning; the following contains content that the anal retentive may find offensive - please skip on to the next posting!" |
05-03-2013, 09:46 PM | #7 |
Member
Join Date: Sep 2011
Location: Reform Alabama
Posts: 60
|
Re: Model A differential parts
I am in the market for a rearend housing and bolts if you still have yours. Thanks, Gary
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|