Valve Installation Tool

[Vintage Copper 47]

I am looking for that specialty tool that compresses the valve springs when installing/removing the valves.. I've attached a youtube video showing the tool (at the 3 min/38 sec mark).. What is the proper name of this tool & the second tool.. and where can I get one?
https://www.youtube.com/watch?v=DuyPOkCXIT8

Thanks for any info

[flatheadmurre]

Valve spring compressor and keeper installation tool...
https://www.ebay.com/itm/Vintage-USA...0AAOSwMKVcLsSD
https://www.ebay.com/itm/Vintage-Sun...IAM:rk:27:pf:0
A normal valvespring compressor works to if you have one at hand...

[19Fordy]

Here's another very commonly used style.
https://www.ebay.com/itm/Vintage-Lec...JloD:rk:1:pf:0

Mr. Van Pelt also describes several very helpful tools.
http://www.vanpeltsales.com/FH_web/f...al_tools-2.htm

[big job]

Thats the one we use think its a "KD" from Napa. You want the one with the star wheel
the ratchet ones maybe good for a model T or A where there is room, but not for a V8
its tight quarters down there.

[flatheadmurre]

Originally Posted by 19Fordy

Here's another very commonly used style.
https://www.ebay.com/itm/Vintage-Lec...JloD:rk:1:pf:0

Mr. Van Pelt also describes several very helpful tools.
http://www.vanpeltsales.com/FH_web/f...al_tools-2.htm

Working with the KD bar and the 918 clamp on a H motor doesn´t work to good.
Using the KD 918 on a G motor you need an adapter between the clamp and the deck to compensate for the bigger inlet valve,

[Vintage Copper 47]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by flatheadmurre

Working with the KD bar and the 918 clamp on a H motor doesn´t work to good.
Using the KD 918 on a G motor you need an adapter between the clamp and the deck to compensate for the bigger inlet valve,

Thanks!