|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-08-2021, 09:38 AM | #1 |
BANNED
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 6,066
|
Front fender bracket to frame bolts...
Just what was the correct bolt attachment of the Front fender bracket to the frame?
Was it nuts to the outside or nuts to the inside? I want to say say nuts to the inside on 1929 thru 1931 without Castel nuts...But what about the 1928's when Castel Nuts were used? Nuts to the inside or nuts to the outside? Thanks. Pluck |
04-08-2021, 10:25 AM | #2 |
Senior Member
Join Date: May 2010
Location: Ridgefield, Ct
Posts: 3,441
|
Re: Front fender bracket to frame bolts...
Nuts to the outside would make assembly a lot faster IMO.
Bob
__________________
They don't have to run to be enjoyed. I'm here to enjoy the hobby, and enjoy the cars no matter what they look like. Most of the worlds problems are electrical. |
Sponsored Links (Register now to hide all advertisements) |
|
04-09-2021, 10:12 AM | #3 | |
Senior Member
Join Date: May 2010
Location: Boulder, CO
Posts: 559
|
Re: Front fender bracket to frame bolts...
Quote:
Front Fender Bracket Fasteners (bracket to frame) Forged Brackets – One 1/2-20 x 1-9/16 bolt and two 3/8-24 bolts. Through April 1928, the bracket to frame bolts used castle nuts facing outward with cotter pins. Also, starting in early 1928 hex nuts with lock washers were used with bolt heads facing outward (note usage date overlap). Bolts were cadmium plated into late 1928 and gloss black thereafter. Cotters were unfinished. Nuts were unfinished into late 1928 and zinc plated thereafter. Lock washers were unfinished. This is at https://aafords.com/aa-chassis/aa-16000-fenders/#ffas
__________________
[email protected] - email contact https://aafords.com Ford Model AA Truck Club @ aafords.com |
|
04-10-2021, 09:04 AM | #4 |
Senior Member
Join Date: Jun 2020
Location: Fall Creek, WI
Posts: 213
|
Re: Front fender bracket to frame bolts...
I’ve always been told “nuts go you”!
|
04-10-2021, 09:12 AM | #5 |
BANNED
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 6,066
|
Re: Front fender bracket to frame bolts...
Sponsored Links (Register now to hide all advertisements)
Pluck |
|
|
Sponsored Links (Register now to hide all advertisements) |
|