The Ford Barn

cadillacoffin · 08-14-2012, 04:34 PM

my motor came with a cam and i was wondering if i could id it. the lift is at .357 and it has EA and a 8 casted into the shaft. ring any bells?

flatjack9 · 08-14-2012, 05:33 PM

EA would be a stock 52 -53 cam. Lift was around .330 lift. If it was reground, there usually is some ID stamped on the end of the cam.

cadillacoffin · 08-15-2012, 10:20 PM

Sponsored Links (Register now to hide all advertisements)

i belive there is an E inside a circle.

08-14-2012, 04:34 PM	#1
cadillacoffin Senior Member Join Date: May 2010 Posts: 158	Cam id my motor came with a cam and i was wondering if i could id it. the lift is at .357 and it has EA and a 8 casted into the shaft. ring any bells?

08-14-2012, 05:33 PM	#2
flatjack9 Senior Member Join Date: May 2010 Location: Oshkosh, Wi Posts: 4,526	Re: Cam id EA would be a stock 52 -53 cam. Lift was around .330 lift. If it was reground, there usually is some ID stamped on the end of the cam.

08-15-2012, 10:20 PM	#3
cadillacoffin Senior Member Join Date: May 2010 Posts: 158	Re: Cam id Sponsored Links (Register now to hide all advertisements) i belive there is an E inside a circle.