|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-15-2020, 11:57 AM | #1 |
Senior Member
Join Date: Nov 2010
Location: SPRUCE PINE NC
Posts: 446
|
29 Tudor Upholstery Question
Well, here I am again! Attacking the upholstery project and I have another question.
I am installing the rear corner panels and I noticed that the fabric is not laying flat against the contour of the cardboard. I have not glued the fabric to the cardboard outer faces, I only applied glue to the rear of the panels where the fabric folds around the edge and attaches to the rear of the cardboard. I made a jig to hold the panel in the curved position while attaching the fabric. Should I have lightly applied spray glue to the cardboard where the fabric attaches to the panel in order to hold the fabric to the contour?
__________________
Why is there never enough time to do it right, but always enough time to do it over!!! |
03-15-2020, 12:19 PM | #2 |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,486
|
Re: 29 Tudor Upholstery Question
Yes
|
Sponsored Links (Register now to hide all advertisements) |
|
03-15-2020, 12:44 PM | #3 |
Senior Member
Join Date: Nov 2010
Location: SPRUCE PINE NC
Posts: 446
|
Re: 29 Tudor Upholstery Question
__________________
Why is there never enough time to do it right, but always enough time to do it over!!! |
03-15-2020, 04:32 PM | #4 |
Senior Member
Join Date: Nov 2010
Location: SPRUCE PINE NC
Posts: 446
|
Re: 29 Tudor Upholstery Question
Worked like a charm!
__________________
Why is there never enough time to do it right, but always enough time to do it over!!! |
03-17-2020, 08:42 AM | #5 |
Member
Join Date: Jul 2014
Posts: 40
|
Re: 29 Tudor Upholstery Question
Sponsored Links (Register now to hide all advertisements)
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|