The Ford Barn

Paul in Colorado · 11-15-2010, 05:00 PM

I have a Signal Stat 900 7 wire turn signal switch on my 1930 Town Sedan, using the cowl lights as front turn signals. In How to Restore your Model A, Volume 5, there is an article indicating that an eighth wire can be added to the switch to also allow the cowl lights to be used as parking lights. This can be done with a single filament bulb. Does anyone have a diagram showing the internal configuration of this switch and showing how this red/green wire is connected inside the switch?

Thanks in advance for your help.

Paul

11-15-2010, 05:00 PM	#1
Paul in Colorado Senior Member Join Date: May 2010 Location: Arvada, Colorado Posts: 175	Signal Stat 900 Modification I have a Signal Stat 900 7 wire turn signal switch on my 1930 Town Sedan, using the cowl lights as front turn signals. In How to Restore your Model A, Volume 5, there is an article indicating that an eighth wire can be added to the switch to also allow the cowl lights to be used as parking lights. This can be done with a single filament bulb. Does anyone have a diagram showing the internal configuration of this switch and showing how this red/green wire is connected inside the switch? Thanks in advance for your help. Paul