The Ford Barn

61Klassic · 09-30-2021, 03:59 AM

Hi all, I'm trying to find out which, if any of the flathead 4x2 intakes had individual runners as opposed to a plenum.

I did try posting on the HAMB, but little response.

Thanks guys.
Kev

Ronnieroadster · 09-30-2021, 07:00 PM

The E&S 4X2 intake has individual runners.
Ronnieroadster

61Klassic · 10-01-2021, 01:53 AM

Thanks Ronnie. Any others?

Ronnieroadster · 10-01-2021, 02:26 PM

There's also the E&S Super Marine Special the carbs are located side by side. Another has no name similar to E&S only thing on the intake is Burbank California. And the last one is the Mulit also similar to the E&S. If your in the market for the ones i listed let me know.
Ronnieroadster

Ol' Ron · 10-01-2021, 10:34 PM

Walt ran one on his 40 276 on the street with strmburgs and it ran quite well. Not sure what brand intake it was.

Tim Ayers · 10-02-2021, 06:59 AM

Sponsored Links (Register now to hide all advertisements)

Quote:

Originally Posted by Ol' Ron

Walt ran one on his 40 276 on the street with strmburgs and it ran quite well. Not sure what brand intake it was.

I believe he had an Edelbrock which isn't an independent runner type, but instead the connected runners are smaller than the runners over the ports. I guess more like a scavenger type of scenario.

09-30-2021, 03:59 AM	#1
61Klassic Member Join Date: Jul 2019 Location: Kent UK Posts: 35	flathead V8 4x2 intakes Hi all, I'm trying to find out which, if any of the flathead 4x2 intakes had individual runners as opposed to a plenum. I did try posting on the HAMB, but little response. Thanks guys. Kev

09-30-2021, 07:00 PM	#2
Ronnieroadster Senior Member Join Date: Dec 2010 Location: East Coast in CT Posts: 1,524	Re: flathead V8 4x2 intakes The E&S 4X2 intake has individual runners. Ronnieroadster __________________ I use the F word a lot no not that word these words Flathead , Focus and Finish. "Life Member of the Bonneville 200 MPH Club using a Ford Flathead block" Owner , Builder, Driver of the First Ford Flathead bodied roadster to run 200 MPH Record July 13, 2018 LTA timing association 200.921 in one and a half miles burning gasoline. First ever gas burning Ford flathead powered roadster to run 200 MPH at Bonneville Salt Flats setting the record August 7th 2021 at 205.744 MPH

10-01-2021, 01:53 AM	#3
61Klassic Member Join Date: Jul 2019 Location: Kent UK Posts: 35	Re: flathead V8 4x2 intakes Thanks Ronnie. Any others?

10-01-2021, 02:26 PM	#4
Ronnieroadster Senior Member Join Date: Dec 2010 Location: East Coast in CT Posts: 1,524	Re: flathead V8 4x2 intakes There's also the E&S Super Marine Special the carbs are located side by side. Another has no name similar to E&S only thing on the intake is Burbank California. And the last one is the Mulit also similar to the E&S. If your in the market for the ones i listed let me know. Ronnieroadster __________________ I use the F word a lot no not that word these words Flathead , Focus and Finish. "Life Member of the Bonneville 200 MPH Club using a Ford Flathead block" Owner , Builder, Driver of the First Ford Flathead bodied roadster to run 200 MPH Record July 13, 2018 LTA timing association 200.921 in one and a half miles burning gasoline. First ever gas burning Ford flathead powered roadster to run 200 MPH at Bonneville Salt Flats setting the record August 7th 2021 at 205.744 MPH

10-01-2021, 10:34 PM	#5
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,855	Re: flathead V8 4x2 intakes Walt ran one on his 40 276 on the street with strmburgs and it ran quite well. Not sure what brand intake it was.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode