The Ford Barn

rocketron · 02-01-2012, 07:15 AM

Building a '30-'31 Model A RPU. Have cowl and doors. Need the rear clip, 'bustle' area. The rear section from a Tudor will work or even the rear section from a closed cab PU. Possibly even the front seat back divider from any tub/phaeton...esp. old Dodge (curved panel that the knees of the rear passengers almost touch).

Condition not real critical, as long as there are no big holes and the piece would take a weld.

Prefer local source...eastern Mass., southern NH/Maine

e-mail directly ONLY [email protected]

Thanks,
Rocket Ron

JTW · 02-01-2012, 07:40 PM

Sponsored Links (Register now to hide all advertisements)

Sold one the other day that was going to be used for the same purpose - BUT have 4 or 5 more, in Maine.

02-01-2012, 07:15 AM	#1
rocketron Junior Member Join Date: May 2010 Location: Massachusetts Posts: 4	Model A Rear Clip City: Stoneham State: MA Building a '30-'31 Model A RPU. Have cowl and doors. Need the rear clip, 'bustle' area. The rear section from a Tudor will work or even the rear section from a closed cab PU. Possibly even the front seat back divider from any tub/phaeton...esp. old Dodge (curved panel that the knees of the rear passengers almost touch). Condition not real critical, as long as there are no big holes and the piece would take a weld. Prefer local source...eastern Mass., southern NH/Maine e-mail directly ONLY [email protected] Thanks, Rocket Ron

02-01-2012, 07:40 PM	#2
JTW Senior Member Join Date: May 2010 Location: Owls Head Posts: 257	Re: Model A Rear Clip Sponsored Links (Register now to hide all advertisements) Sold one the other day that was going to be used for the same purpose - BUT have 4 or 5 more, in Maine. __________________ Driving old Fords since 1947