Go Back   The Ford Barn > The Swap Meet > For Sale > Early V8

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 05-02-2021, 06:53 PM   #1
Andy
Senior Member
 
Join Date: May 2010
Location: Kerrville, Tx
Posts: 2,767
Default 37-48 steering sector shaft

City: Kerrville
State: Texas
Price: $40

Sponsored Links (Register now to hide all advertisements)
This shaft has some rust damage to the roller. it is not bad. The roller is really extreamly hard and expensive to replace. The pin has to be machined out and new side clearance washers must be machined to take out all side clearance. The new pin has to be machined and installed.
This shaft is not perfect but is surly usable. The roller does not have any play at all. It fits as new. It rolls prfectly with no roughness. The adjustment slot shows no wear. Splines and threads are fine.
Attached Images
File Type: jpeg P1050340.jpeg (59.7 KB, 9 views)
File Type: jpeg P1050342.jpeg (62.0 KB, 9 views)
File Type: jpeg P1050341.jpeg (64.1 KB, 8 views)
File Type: jpeg P1050343.jpeg (63.9 KB, 8 views)
File Type: jpeg P1050344.jpeg (48.3 KB, 6 views)
Andy is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 05:23 AM.