07-04-2021, 09:56 AM | #1 |
Senior Member
Join Date: May 2021
Location: NH/ VT
Posts: 336
|
Anti-rattlers
I bought a pair of anti-rattle felt bushings for the spark and gas rods--not from any known need, but because they sound like a good idea. As I re-assemble the steering tube, I cannot see how or where these bushings are installed. Any thoughts ?
|
07-04-2021, 10:44 AM | #2 |
Senior Member
Join Date: May 2010
Location: Tacoma, WA
Posts: 1,025
|
Re: Anti-rattlers
They slip on to the spark and gas rods. Les Andrews has instructions. I think just above the half way point and they should be staggered a bit too.
|
Sponsored Links (Register now to hide all advertisements) |
|
07-04-2021, 11:06 AM | #3 |
Senior Member
Join Date: May 2021
Location: NH/ VT
Posts: 336
|
Re: Anti-rattlers
I would expect to see it in Les Andrews, but I don't find it. Logic says they slip on just as you say, but that can happen only if they go on before the big top bushing is installed, right?
|
07-04-2021, 12:09 PM | #4 |
Senior Member
Join Date: May 2021
Location: NH/ VT
Posts: 336
|
Re: Anti-rattlers
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|