The Ford Barn

Calahan · 07-22-2011, 09:20 AM

It was time to replace my original front leaf spring. I decided to go with "A" Springs. The spring is correct and the clamp location are correct. It was a Good choice. Thanks Travis. Click here http://www.a-springs.com/products.html

Purdy Swoft · 07-22-2011, 10:42 AM

The last two front springs that I bought came from Smith and Jones in Columbia South Carolina. At the time they were the only people that offered a front spring that had the bushings and spring clamps already installed. I have been well pleased with these springs. They also sell good repro bumpers that are made of spring steel.

1928Pickuppain · 07-22-2011, 11:19 AM

Sponsored Links (Register now to hide all advertisements)

I just did mine i just took my origonals and rebent them i used my 2 tone press and two steal brincks and worked them till themy were overly bent then put them in the vice and put a new bolt in. I used a spreder to open them up enoughf to install. The truck sat prity high and the shackels wernt even after 3 days she settled right were she should be. I had a broken leef spring and a buddy gave me an extra one. no need to spend a penny if you dont have a press and have a broken spring im shure theres some one in the club around u that has what you need.

07-22-2011, 09:20 AM	#1
Calahan Member Join Date: Jan 2011 Location: Richmond Michigan Posts: 32	"A" Springs Front Leaf Spring It was time to replace my original front leaf spring. I decided to go with "A" Springs. The spring is correct and the clamp location are correct. It was a Good choice. Thanks Travis. Click here http://www.a-springs.com/products.html

07-22-2011, 10:42 AM	#2
Purdy Swoft Senior Member Join Date: May 2010 Location: Alabama Posts: 8,099	Re: "A" Springs Front Leaf Spring The last two front springs that I bought came from Smith and Jones in Columbia South Carolina. At the time they were the only people that offered a front spring that had the bushings and spring clamps already installed. I have been well pleased with these springs. They also sell good repro bumpers that are made of spring steel.

07-22-2011, 11:19 AM	#3
1928Pickuppain Senior Member Join Date: May 2010 Location: Billerica, Ma Posts: 461	Re: "A" Springs Front Leaf Spring Sponsored Links (Register now to hide all advertisements) I just did mine i just took my origonals and rebent them i used my 2 tone press and two steal brincks and worked them till themy were overly bent then put them in the vice and put a new bolt in. I used a spreder to open them up enoughf to install. The truck sat prity high and the shackels wernt even after 3 days she settled right were she should be. I had a broken leef spring and a buddy gave me an extra one. no need to spend a penny if you dont have a press and have a broken spring im shure theres some one in the club around u that has what you need.