|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-16-2010, 05:03 PM | #1 |
Senior Member
Join Date: May 2010
Posts: 248
|
'28-'29 RPU quarter panel brace
I'm installing rear quarter panels on one and don't have this pair of braces. Here's a photo of the left side. I'd appreciate it if someone could enlighten me about where this brace fits. A photo would be great if possible.
Bob |
09-17-2010, 10:15 AM | #2 |
Senior Member
Join Date: May 2010
Location: Fresno, Ca.
Posts: 3,636
|
Re: '28-'29 RPU quarter panel brace
Bob,
This is a shot in the dark, the piece on the left, in your pic, is the doubler that fits at the top of the B pillar, the slot is for the prop arm for the top. Does this help. The little tab is for the seat back wood? The other piece maybe the corner brace. Dudley |
Sponsored Links (Register now to hide all advertisements) |
|
09-17-2010, 10:46 AM | #3 |
Member
Join Date: May 2010
Location: N.W. Mo
Posts: 72
|
Re: '28-'29 RPU quarter panel brace
The larger piece goes at the top of the quarter and connects it to the back panel. The little tab welds to it and sticks up through the top of the quarter for the top irons to attach to.
The smaller piece goes at the front bottom of the quarter and attached the quarter to the subrail and seat riser. |
09-17-2010, 06:47 PM | #4 |
Senior Member
Join Date: May 2010
Posts: 248
|
Re: '28-'29 RPU quarter panel brace
Sponsored Links (Register now to hide all advertisements)
Bob |
|
|
Sponsored Links (Register now to hide all advertisements) |
|