Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 05-03-2023, 07:57 AM   #1
AnthonyG
Senior Member
 
AnthonyG's Avatar
 
Join Date: May 2013
Location: Pa.
Posts: 2,174
Default Early V8 Garage, Rich Lacy Master cyl. Conv. Kit

Hi All, has anyone done the ‘Early V8 Garage’ juice brake conversion on a ‘35? I am in the process of installing / converting to hydraulic brakes. I have all the @ the wheels conversion done & ready to install the Early V8 Garage/ Rich Lacy’s Master cylinder kit. I bought the kit several yrs ago then due to medical issues couldn’t get installed til now. I lost the instruction sheets. Been trying to contact Rich unsuccessfully & was hoping some one on FB had them.
__________________
Nomad
AnthonyG is offline   Reply With Quote
Old 05-03-2023, 08:11 AM   #2
drfromnc
Senior Member
 
Join Date: Oct 2017
Location: Smithfield, NC
Posts: 259
Default Re: Early V8 Garage, Rich Lacy Master cyl. Conv. Kit

Well I have the instructions for 33&34 that I can scan and post but I don’t think it will help you.
drfromnc is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 05-03-2023, 09:23 AM   #3
Zeke3
Senior Member
 
Zeke3's Avatar
 
Join Date: Dec 2014
Location: Columbus, IN
Posts: 1,407
Default Re: Early V8 Garage, Rich Lacy Master cyl. Conv. Kit

You might try to contact Dennis Lacy on Instagram, he is pretty active over there. Try sending him a DM (direct message) to request the instructions at Dennis_lacy_earlyv8garage.

Last edited by Zeke3; 05-03-2023 at 09:26 AM. Reason: Added IG address
Zeke3 is offline   Reply With Quote
Old 05-03-2023, 09:44 AM   #4
32phil
Senior Member
 
Join Date: May 2010
Location: Montgomery, NY & Port St. Lucie Florida
Posts: 936
Default Re: Early V8 Garage, Rich Lacy Master cyl. Conv. Kit

Most EV8 Garage kits are straight forward and easy to install.
All components use existing holes in the stock frame and have all necessary hardware and bits and pieces included.
I've installed 5 or 6 1932 kits, some in our cars plus several friends cars.
I usually lay the parts out and it's pretty obvious where everything goes.
It's a busy shop but they will get back to you.
__________________
Early Ford Lock & Key Service
http://www.fordbarn.com/forum/showthread.php?t=46583
32phil is offline   Reply With Quote
Old 05-03-2023, 11:34 AM   #5
AnthonyG
Senior Member
 
AnthonyG's Avatar
 
Join Date: May 2013
Location: Pa.
Posts: 2,174
Default Re: Early V8 Garage, Rich Lacy Master cyl. Conv. Kit

The ‘32 -34 kits r significantly different. I have a pic Rich sent from when I originally ordered. I’m a bit dyslexic so it’s hard for me to know what I’m looking at without more of the ‘35 frame shown. I will continue to try it contact Rich. I’ve EM’d & called a few times w no reply. Is he on the FB for DM?IMG_3629.jpg
__________________
Nomad
AnthonyG is offline   Reply With Quote
Old 05-03-2023, 11:37 AM   #6
AnthonyG
Senior Member
 
AnthonyG's Avatar
 
Join Date: May 2013
Location: Pa.
Posts: 2,174
Default Re: Early V8 Garage, Rich Lacy Master cyl. Conv. Kit

Sponsored Links (Register now to hide all advertisements)
Sorry for pic size, blowing up it blurs out.
__________________
Nomad
AnthonyG is offline   Reply With Quote
Old 05-03-2023, 01:43 PM   #7
Newc
Senior Member
 
Newc's Avatar
 
Join Date: May 2010
Posts: 2,488
Default Re: Early V8 Garage, Rich Lacy Master cyl. Conv. Kit

I gave up trying to contact them..Newc
Newc is offline   Reply With Quote
Old 05-03-2023, 02:10 PM   #8
Krylon32
Senior Member
 
Join Date: May 2010
Posts: 4,484
Default Re: Early V8 Garage, Rich Lacy Master cyl. Conv. Kit

I hear a lot about guys using his products but there must be a secret hand shake or code to contact his business to buy his parts?
Krylon32 is offline   Reply With Quote
Old 05-03-2023, 06:22 PM   #9
OldGold360
Senior Member
 
Join Date: Nov 2020
Location: SW WA
Posts: 639
Default Re: Early V8 Garage, Rich Lacy Master cyl. Conv. Kit

Quote:
Originally Posted by Newc View Post
I gave up trying to contact them..Newc
Me too. I tried a few times... I think that should be more than enough.
OldGold360 is offline   Reply With Quote
Old 05-03-2023, 06:32 PM   #10
AnthonyG
Senior Member
 
AnthonyG's Avatar
 
Join Date: May 2013
Location: Pa.
Posts: 2,174
Unhappy Re: Early V8 Garage, Rich Lacy Master cyl. Conv. Kit

Anybody got the inside track to Rich Lacy @ Early V8 Garage
__________________
Nomad
AnthonyG is offline   Reply With Quote
Old 05-03-2023, 07:35 PM   #11
tubman
Senior Member
 
tubman's Avatar
 
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,319
Default Re: Early V8 Garage, Rich Lacy Master cyl. Conv. Kit

Quote:
Originally Posted by AnthonyG View Post
Anybody got the inside track to Rich Lacy @ Early V8 Garage
Why would you want it? It's obvious that they're too busy (or perhaps too arrogant) to return calls. If it were something difficult, I might be able to see it, but hydraulic brakes on a '35? I put a set on my '36 when I was 17 in 1959. They worked great

Sometimes you have to stand on your own two feet.
tubman is offline   Reply With Quote
Old 05-03-2023, 07:39 PM   #12
AnthonyG
Senior Member
 
AnthonyG's Avatar
 
Join Date: May 2013
Location: Pa.
Posts: 2,174
Default Re: Early V8 Garage, Rich Lacy Master cyl. Conv. Kit

__________________
Nomad
AnthonyG is offline   Reply With Quote
Old 05-03-2023, 09:30 PM   #13
V8COOPMAN
Senior Member
 
V8COOPMAN's Avatar
 
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,114
Default Re: Early V8 Garage, Rich Lacy Master cyl. Conv. Kit

.

This has gotten ridiculous! Folks have been complaining about the inability to make reasonable contact with ANYONE at The "Early V8 Garage" for months now, if not longer. Richard and Dennis need to get off of their respective 'high horses', come down to earth and find a way for PAYING CUSTOMERS (the people that have made Early V8 Garage so seemingly successful) to make reasonable contact with the folks running the show at The Early V8 Garage. Success can only last so long if you don't answer the phone! Shame on you guys! You guys are one of the relative few outfits that has been able to maintain a "squeaky-clean" and well-deserved reputation through all of the years that are finding some of these old Ford specialty outfits either beginning to shut-down, or in your case ..... CEASE TO GIVE A RAT'S BUTT about customer communications. C'mon guys, what the heck, over?

Coop

.
__________________
Click Links Below __


'35-'36 W/8BA & MECHANICAL FAN


T5 W/TORQUE TUBE
V8COOPMAN is offline   Reply With Quote
Old 05-04-2023, 07:35 AM   #14
Tim Ayers
Senior Member
 
Join Date: May 2010
Location: NJ
Posts: 6,181
Default Re: Early V8 Garage, Rich Lacy Master cyl. Conv. Kit

This is what I understand. Richard is pretty much retired and his son, Dennis, is running the business. Judging from Dennis' Instragram posts, he's got his hands full. You may have better luck contacting Dennis through his Instrgram account which is dennis_lacy_earlyV8garage
Tim Ayers is offline   Reply With Quote
Old 05-04-2023, 08:37 AM   #15
37 truck
Senior Member
 
Join Date: Jul 2011
Location: Omak, Washington
Posts: 207
Default Re: Early V8 Garage, Rich Lacy Master cyl. Conv. Kit

Dennis may be on the Hamb, I recall him working on a shop truck a few years ago.
37 truck is offline   Reply With Quote
Old 05-04-2023, 05:15 PM   #16
AnthonyG
Senior Member
 
AnthonyG's Avatar
 
Join Date: May 2013
Location: Pa.
Posts: 2,174
Default Re: Early V8 Garage, Rich Lacy Master cyl. Conv. Kit

Hi Tim, thx for the input, Zeke 3 said same in reply 3 &. I sent message on Instagram 2 days ago, sent EM, Left voice mail on phone all 2 or more days ago. No reply’s to any. I’m inclined to agree with Coop’s message to Early V8 Garage! If he’s that busy he must b doing well & needs to hire help or their Reputation will go to hell!
__________________
Nomad
AnthonyG is offline   Reply With Quote
Old 05-04-2023, 05:17 PM   #17
AnthonyG
Senior Member
 
AnthonyG's Avatar
 
Join Date: May 2013
Location: Pa.
Posts: 2,174
Default Re: Early V8 Garage, Rich Lacy Master cyl. Conv. Kit

Thx 37 Truck, I’ll try on the Hamb too
__________________
Nomad
AnthonyG is offline   Reply With Quote
Old 05-04-2023, 07:49 PM   #18
Tim Ayers
Senior Member
 
Join Date: May 2010
Location: NJ
Posts: 6,181
Default Re: Early V8 Garage, Rich Lacy Master cyl. Conv. Kit

Quote:
Originally Posted by AnthonyG View Post
Hi Tim, thx for the input, Zeke 3 said same in reply 3 &. I sent message on Instagram 2 days ago, sent EM, Left voice mail on phone all 2 or more days ago. No reply’s to any. I’m inclined to agree with Coop’s message to Early V8 Garage! If he’s that busy he must b doing well & needs to hire help or their Reputation will go to hell!
I’m not defending them and I was trying to be nice. Dennis seems to be a one man show and I agree he needs to hire help before the phone stops ringing due to treating customers like they are treating you.
Tim Ayers is offline   Reply With Quote
Old 05-04-2023, 08:21 PM   #19
OldGold360
Senior Member
 
Join Date: Nov 2020
Location: SW WA
Posts: 639
Default Re: Early V8 Garage, Rich Lacy Master cyl. Conv. Kit

Being a one man shop is never an excuse. I’ve been a one man shop for over 18 years and I always respond to phone calls and emails within 24 hours, if not sooner, and I’m extremely busy. It’s strange to me that there are some shop owners that treat customers, or potential customers, this way. However, maybe there’s more to it than we know.
OldGold360 is offline   Reply With Quote
Old 05-04-2023, 08:51 PM   #20
tubman
Senior Member
 
tubman's Avatar
 
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,319
Default Re: Early V8 Garage, Rich Lacy Master cyl. Conv. Kit

I totally agree.
tubman is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:20 AM.