|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-09-2023, 06:50 PM | #1 |
Senior Member
Join Date: Dec 2019
Location: Gardnerville, Nevada
Posts: 185
|
59AB Front cam cover Special 5/16 18 cap screws
I need five or ten of theses special hex head cap screws thread is 5/16 18 pitch. they have a shoulder just below the hex head that is a few thou larger than the thread o.d. Does anyone know where to get these. The larger shoulder dia is for alingment for DISTRIBUTOR CONCENTRICITY ! . Thanks Stan White
|
02-09-2023, 07:07 PM | #2 |
Senior Member
Join Date: May 2010
Location: on the Littlefield
Posts: 6,159
|
Re: 59AB Front cam cover Special 5/16 18 cap screws
Try looking at pressure plate bolts, they have a shoulder too
|
Sponsored Links (Register now to hide all advertisements) |
|
02-09-2023, 07:14 PM | #3 |
Senior Member
Join Date: May 2010
Location: Solihull, England.
Posts: 8,755
|
Re: 59AB Front cam cover Special 5/16 18 cap screws
Pressure plate bolts have a longer shoulder and a shorter thread than the distributor bolts. In a pinch you might use a longer bolt that has a short non threaded shank and cut the thread down. I'm not sure if the proper distributor bolts have a larger shank than normal (5/16").
I don't think it is that critical to a few thou. |
02-09-2023, 07:40 PM | #4 |
Senior Member
Join Date: May 2010
Location: Central Coast, Calif.
Posts: 839
|
Re: 59AB Front cam cover Special 5/16 18 cap screws
Aren't these the same as the shouldered bolts also used for the transmission top?
Either way, Third Gen carries both. One plated, others black https://thirdgenauto.com/product/193...over-hardware/ https://thirdgenauto.com/product/193...-headed-bolts/ |
02-10-2023, 06:46 AM | #5 |
Senior Member
Join Date: May 2010
Location: Minot, ND
Posts: 218
|
Re: 59AB Front cam cover Special 5/16 18 cap screws
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|