|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-09-2018, 03:02 PM | #1 |
Member
Join Date: Jun 2015
Location: Atlanta Ga
Posts: 82
|
spark plug wires
looking for a set of 7mm red spark plug wires for my 51flathesd v8 with a chevy distributor thank you for any help on this
|
08-09-2018, 03:13 PM | #2 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: spark plug wires
delete
Last edited by JSeery; 08-09-2018 at 07:59 PM. |
Sponsored Links (Register now to hide all advertisements) |
|
08-09-2018, 05:10 PM | #3 |
Senior Member
Join Date: May 2010
Location: Ft Mohave,Az
Posts: 1,987
|
Re: spark plug wires
Checkout the Brillman.com elec site.
|
08-09-2018, 07:47 PM | #4 |
Senior Member
Join Date: May 2010
Location: SPEEDWAY INDIANA
Posts: 4,148
|
Re: spark plug wires
If ya buy a universal set they come with different ends and you can tailor them to the engine........
https://www.ebay.com/itm/Brand-New-8...sid=m570.l1313 these are 8mm but they have 7mm |
08-09-2018, 08:48 PM | #5 |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,312
|
Re: spark plug wires
I have one thing to say about spark plugs wires. I bought my first set of "Rajah" terminals (from Brillman's) about a year ago, and I'll never use anything else unless it's a 100 point restoration.
|
08-09-2018, 08:53 PM | #6 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: spark plug wires
Sponsored Links (Register now to hide all advertisements)
|
08-09-2018, 08:55 PM | #7 |
Senior Member
Join Date: May 2010
Location: MN
Posts: 7,053
|
Re: spark plug wires
By the foot and Rajahs too.
https://www.thehotrodcompany.com/ Been a while but I have never been disappointed to this point. Don't get thown off by the name. Lots of guys with "hotrods" want the correct wires and ends for their flathead. Last edited by Tinker; 08-09-2018 at 09:07 PM. |
08-09-2018, 09:00 PM | #8 |
Senior Member
Join Date: May 2010
Location: NorCal
Posts: 2,617
|
Re: spark plug wires
Another vote for Brillmans.
About 6 years ago, I was still able to buy a 100' roll of Packard 440 wire from my local NAPA store. Not any more, at least where I'm located Last edited by Kahuna; 08-10-2018 at 09:07 AM. |
08-09-2018, 09:05 PM | #9 |
Senior Member
Join Date: May 2010
Location: MN
Posts: 7,053
|
Re: spark plug wires
...think i'm putting these guys in my Rolodex. https://brillman.com/
Cheaper at hotrodcompany but 10ft to start. Need at least 14ft if I remember correctly. Like I mentioned I have not had issues with hotrodco, But maybe it's changed. Last edited by Tinker; 08-09-2018 at 09:14 PM. |
08-31-2018, 10:05 PM | #10 | |
Senior Member
Join Date: Jan 2014
Location: Orcas Island Washington
Posts: 4,926
|
Re: spark plug wires
Quote:
So Jim you are saying that non metal wire is ok with our systems? Stock Bubba crab 12 v neg. I really want to do this over the weekend and don't have time for brillmans. Napa has a universal set. So this should work fine, huh? Napa is the only auto parts store on the island.
__________________
Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1947 Tonner Pickup (red) mostly stock with exception of a cummins 6at turbo diesel, 1946 Tonner Pickup (green) with 226 cu in 6 cyl flathead, 1979 Toyota landcruiser wagon, completely encased in 1947 Ford Jailbar sheet metal. Ok, cornbinder rear fenders..... 'Rusty ol' floorboards, hot on their feet' (Alan Jackson) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|