09-04-2017, 10:23 AM | #1 |
Member
Join Date: May 2010
Posts: 52
|
Heders
I have a set of chrome headers look like Fenton but have a ford part number any ideas or information thanks norm 507 301 8300
|
09-04-2017, 10:42 AM | #2 |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,312
|
Re: Heders
It sure would help if you could post some pictures (especially of the part number on the casting).
|
Sponsored Links (Register now to hide all advertisements) |
|
09-04-2017, 11:14 AM | #3 |
Senior Member
Join Date: May 2010
Location: East Hartford, Ct
Posts: 5,898
|
Re: Heders
You have to consider that they may be Ford headers that someone had chrome plated at some point in time. (wouldn't be the first time)
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES |
09-04-2017, 11:24 AM | #4 |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,312
|
Re: Heders
Ford made headers? I did not know that; now I sure would like to see some pictures. (I am differentiating between "headers" and "exhaust manifolds" here.)
|
09-04-2017, 04:27 PM | #5 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,426
|
Re: Heders
Ford made high flow exhaust systems that sort of resemble headers but not in the flathead era. It was much later in the late 50s early 60s and they were generally cast iron. I'd be wanting to know what the part number on them is. Ford has a distinct numbering system for early cars up to about 1952 when they changed their prefixes to better suit the larger amount of models in the later era.
|
09-06-2017, 01:24 AM | #6 |
Senior Member
Join Date: May 2010
Location: Damascus Oregon
Posts: 160
|
Re: Heders
Sponsored Links (Register now to hide all advertisements)
Reproduction Fenton headers, made by Fenton, and others, come in only one model, and don't use part numbers. I don't know if all production Fenton headers had the Fenton logo on the castings. |
09-06-2017, 02:34 PM | #7 |
Member
Join Date: May 2010
Posts: 52
|
Re: Heders
Thanks for all the replys will take pictures of the numbers they installed on a296 cubic. inch c 69 a engine will have to put on lift to get pitchers thanks norm
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|