|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-01-2016, 09:10 PM | #1 |
Member
Join Date: Mar 2012
Location: Temuka New Zealand
Posts: 49
|
model A nut and bolt chart.
Hi folks could anyone tell me or put me on the rite track. I have a box full off model A 28-9 engine nuts and bolts is there a chart or a book around that identify the nuts and bolts. Many Thanks.
Gerry (NZ) |
07-01-2016, 09:18 PM | #2 |
Senior Member
Join Date: Dec 2014
Location: Shawnee, Ok
Posts: 3,471
|
Re: model A nut and bolt chart.
That would be a nice chart to have...hope someone posts one.
__________________
Keith Shawnee OK '31 SW 160-B |
Sponsored Links (Register now to hide all advertisements) |
|
07-01-2016, 10:30 PM | #3 |
Senior Member
Join Date: May 2010
Location: Clinton,WA/Whidbey Island
Posts: 4,104
|
Re: model A nut and bolt chart.
Model A Ford Mechanics Handbook Vol 1 pages 132-134
__________________
www.whidbeymodelaclub.com |
07-02-2016, 04:18 AM | #4 |
Member
Join Date: Mar 2012
Location: Temuka New Zealand
Posts: 49
|
Re: model A nut and bolt chart.
Hi many thanks for the replys and thankyou very much for the charts. The nuts and bolts are all in soaking now.Thankyou.
Cheers Gerry (NZ) |
07-02-2016, 12:14 PM | #5 |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 7,032
|
Re: model A nut and bolt chart.
Remember that the length, diameter and thread size is only part of the story. Some of the heads were domed. Some of the heads were "taller" than todays bolts. The heads didn't have hardness specified on them. You can't just get these at the local hardware store. For a correct restoration you need to restore original fasteners or order them from suppliers that have the correct heads.
Charlie Stephens |
07-02-2016, 01:01 PM | #6 |
Senior Member
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
|
Re: model A nut and bolt chart.
Sponsored Links (Register now to hide all advertisements)
"Maybe" he had been awake all night, just pondering, "Who invented THREADS & were the first ones SAE or them COARSE ones???? Bill Curious?
__________________
"THE ASSISTANT GURU OF STUFF" |
07-02-2016, 01:11 PM | #7 | |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: model A nut and bolt chart.
Quote:
The same stuff Ed / Sonny sells |
|
07-02-2016, 04:08 PM | #8 |
Member
Join Date: Mar 2012
Location: Temuka New Zealand
Posts: 49
|
Re: model A nut and bolt chart.
Hi yes as I go through them (sorting them out ) i have noticed that some bolts have holes in the head off them and some heads are domed .oh dear what a night meer. Cheers Gerry (NZ)
|
07-02-2016, 08:28 PM | #9 |
Senior Member
Join Date: May 2010
Posts: 914
|
Re: model A nut and bolt chart.
Also check the back of the original parts book...
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|