Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 11-30-2021, 10:55 AM   #1
RB
Senior Member
 
RB's Avatar
 
Join Date: May 2010
Location: papillion nebraska
Posts: 406
Default 30-31 model 'A' FENDER TO BODY REVEAL

Has anyone used the Snyders quarter reveal repair ? it is listed as a flat panel that requires some shaping to the body contour as it curves around at the rear, it extends 1" above the reveal for welding.
RB is offline   Reply With Quote
Old 12-06-2021, 08:58 AM   #2
RB
Senior Member
 
RB's Avatar
 
Join Date: May 2010
Location: papillion nebraska
Posts: 406
Default Re: 30-31 model 'A' FENDER TO BODY REVEAL

Sponsored Links (Register now to hide all advertisements)
Just thought I would let anyone that may need the repair panel as mentioned above, Snyders do in fact stock both sides, they were kind enough to send several photo's & dimensions. I do have an original piece & assume the Snyder part would be equally as accurate. I originally advertised for a repair for a 32 5w when I found the model 'A' piece that with a bit of trimming will work fine.
RB is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:53 PM.