Dizzy Stuck, does not rotate with Engine

[Ross/Kzoo]

I'm sure that with these posts and/or an ad in the wanted section you should be able to land a good used motor.

[Chris Haynes]

Originally Posted by Wisconsinjimmy

Dist---- is to long of a word.

Add to that he doesn't know how to spell it.

I am sure someone here can come up with a good used set of .030 or .040 pistons.

[Wisconsinjimmy]

Originally Posted by Chris Haynes

Add to that he doesn't know how to spell it.

I am sure someone here can come up with a good used set of .030 or .040 pistons.

Collins offers both spellings with the meanings being the same:
distributor or distributer
noun

• a person or thing that distributes
• a wholesaler or middleman engaged in the distribution of a category of goods, esp to retailers in a specific area
• the device in a petrol engine that distributes the high-tension voltage to the sparking plugs in the sequence of the firing order

I am not worried about the cost of pistons my problem is if I have to re-Babbitt the engine, that is where the cost of this becomes almost prohibitive. Anywho I do appreciate the help and all the words of wisdom will keep you informed on what I find.
Jim

[Wisconsinjimmy]

Originally Posted by Wisconsinjimmy

Yup comes out through the top and appears the cam worm is OK cannot say that for the drive shaft gear.

The gear was damaged due to the spring on the bottom of the pan being broken, that is my guess as nothing else was damaged.

[Bob C]

My guess is either the distributor or the oil pump is froze up.

Bob