Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-29-2020, 07:33 AM   #1
Ed in Maine
Senior Member
 
Join Date: May 2010
Posts: 757
Default Cabriolet 68C Belt Rail Fit Up

I have placed the belt rail back from the body moulding 1/4 in. to allow for proper fit of the top fabric and hide-um welting. This will move the wood into the passenger compartment. This will also move the package tray forward and the seat forward, decreasing the distance allowed for moving your feet into the car.


My question is this: How far should I have the belt rail wood extend past the edge of the body metal at the front of the belt rail? Also, I don't want to weaken the belt rail by making it too thin where the package tray screws to it. Thanks for your help, Ed
Ed in Maine is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 11:55 PM.