The Ford Barn

hotrod8 · 08-03-2010, 05:40 PM

gentelman
i need some advice on r&r for the door glass, and regulator , on my 36 coupe .this one has me stumped,!!!!!!!!!! cant get the regulator out of the door ???
thanks jonny

admiral1960 · 08-03-2010, 06:37 PM

I replaced my windows a number of years ago in my 35 FORDOR Sedan and recorded everything I could think of in a word file.

If you wish I will send it as an email attachment as I tried but was not able to on the forum.

KiWinUS · 08-03-2010, 07:17 PM

Admiral , I would love that also /
Thanks
cheers
tony

jack39nyc · 08-03-2010, 08:27 PM

Admiral, Would you please send my a copy also.
Thanks
jack [email protected]

custom_lettering · 08-04-2010, 05:25 AM

i'm also changing a regulator and side glass. please forward that info to me also. thank you very much!!! [email protected]

dbrock · 08-04-2010, 07:35 AM

Sponsored Links (Register now to hide all advertisements)

I have a '36 Fordor and need to do the windows also...please send me a copy....... thanks....... [email protected]

cryobug · 08-11-2010, 11:15 PM

Please send me a copy also. [email protected] Thanks

1936coupe · 08-12-2010, 04:07 AM

i had to do this last month as the gear mechanism(regulator) had slipped(worn holding plate) and the window was at an angle and cracked(see pic below next post) so,with window in down position remove the roller(stud) guide that runs in radious slot it is on the window glass channell,then raise window fully up remove 8 mounting bolts you can now slide off the 2 raising arms from the window channel by moving left and right,leave mechanism in bottom of door for a mo,the glass and channell can now be removed as one by tilting window upwards, with window garnish surround removed!,then re centre window drive put 2 bolts back to hold,and wind mechanism until arms are parallel (horizontal) turn whole mechanism upside down in door, the window handle drive can be brought out first wiggle mechanism thru the door hole.

1936coupe · 08-12-2010, 04:40 AM

cryobug · 08-12-2010, 07:55 PM

Thanks!!!!!!!!!!!!!! I can't tell you how much help this was for me.

Tom Morookian · 08-13-2010, 05:29 AM

Quote:

Originally Posted by 1936coupe

Can you get me a closeup of what you have labeled "roller nut". My 36 came with no guts in the doors so I'm working with regulators and channels I had to buy. None of the parts I bought have a "roller nut" but there is the "tab" in the center of the channel with a hole drilled in it. What goes in the hole?

1936coupe · 08-13-2010, 06:11 AM

sorry its back in the car now, i stuck the labels on the computor screen of a saved pic, its called a stud and roller basically a headed stud with a roller on it, wescottsauto.com have them and all seals,felt window guides etc.phone 1-800-523-6279

aandkt · 04-11-2011, 12:35 AM

Can't believe we all need the same thing but
Admiral, Would you please send my a copy also.
Thanks
[email protected]

JM 35 Sedan · 04-11-2011, 06:54 AM

Admiral, looks like you may have a "best seller" going here ;-). I would also appreciate getting a copy. Just sent you a PM with my email address. Thank you!

wamnram · 04-11-2011, 07:38 AM

These might help???

Mart · 04-11-2011, 08:47 AM

Looks interesting - is that offset in the locating groove the mechanism that moves the window back before it moves it down?

Mart.

wamnram · 04-11-2011, 01:49 PM

Yes!

08-03-2010, 05:40 PM	#1
hotrod8 Junior Member Join Date: Jun 2010 Location: greencastle indiana Posts: 19	36 window gentelman i need some advice on r&r for the door glass, and regulator , on my 36 coupe .this one has me stumped,!!!!!!!!!! cant get the regulator out of the door ??? thanks jonny

08-03-2010, 06:37 PM	#2
admiral1960 Member Join Date: Jun 2010 Location: Mattawa, WA Posts: 40	Re: 36 window I replaced my windows a number of years ago in my 35 FORDOR Sedan and recorded everything I could think of in a word file. If you wish I will send it as an email attachment as I tried but was not able to on the forum.

08-03-2010, 07:17 PM	#3
KiWinUS Senior Member Join Date: May 2010 Location: Charlotte NC KiWi-L100 available here Posts: 2,963	Re: 36 window Admiral , I would love that also / Thanks cheers tony

08-03-2010, 08:27 PM	#4
jack39nyc Member Join Date: May 2010 Location: Brooklyn NY Posts: 38	Re: 36 window Admiral, Would you please send my a copy also. Thanks jack [email protected]

08-04-2010, 05:25 AM	#5
custom_lettering Member Join Date: Jun 2010 Location: NJ Posts: 50	Re: 36 window i'm also changing a regulator and side glass. please forward that info to me also. thank you very much!!! [email protected]

08-04-2010, 07:35 AM	#6
dbrock Junior Member Join Date: May 2010 Location: Obrien Co. Iowa Posts: 25	Re: 36 window Sponsored Links (Register now to hide all advertisements) I have a '36 Fordor and need to do the windows also...please send me a copy....... thanks....... [email protected]

08-11-2010, 11:15 PM	#7
cryobug Junior Member Join Date: May 2010 Location: FL Posts: 16	Re: 36 window Please send me a copy also. [email protected] Thanks

08-12-2010, 04:07 AM	#8
1936coupe Senior Member Join Date: May 2010 Location: london uk Posts: 114	Re: 36 window i had to do this last month as the gear mechanism(regulator) had slipped(worn holding plate) and the window was at an angle and cracked(see pic below next post) so,with window in down position remove the roller(stud) guide that runs in radious slot it is on the window glass channell,then raise window fully up remove 8 mounting bolts you can now slide off the 2 raising arms from the window channel by moving left and right,leave mechanism in bottom of door for a mo,the glass and channell can now be removed as one by tilting window upwards, with window garnish surround removed!,then re centre window drive put 2 bolts back to hold,and wind mechanism until arms are parallel (horizontal) turn whole mechanism upside down in door, the window handle drive can be brought out first wiggle mechanism thru the door hole. Last edited by 1936coupe; 08-12-2010 at 05:02 AM.

08-12-2010, 04:40 AM	#9
1936coupe Senior Member Join Date: May 2010 Location: london uk Posts: 114	Re: 36 window

08-12-2010, 07:55 PM	#10
cryobug Junior Member Join Date: May 2010 Location: FL Posts: 16	Re: 36 window Thanks!!!!!!!!!!!!!! I can't tell you how much help this was for me.

08-13-2010, 06:11 AM	#12
1936coupe Senior Member Join Date: May 2010 Location: london uk Posts: 114	Re: 36 window sorry its back in the car now, i stuck the labels on the computor screen of a saved pic, its called a stud and roller basically a headed stud with a roller on it, wescottsauto.com have them and all seals,felt window guides etc.phone 1-800-523-6279 Last edited by 1936coupe; 08-13-2010 at 06:20 AM.

04-11-2011, 12:35 AM	#13
aandkt Senior Member Join Date: May 2010 Location: LI NY Posts: 222	Re: 36 window Can't believe we all need the same thing but Admiral, Would you please send my a copy also. Thanks [email protected]

04-11-2011, 06:54 AM	#14
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,858	Re: 36 window Admiral, looks like you may have a "best seller" going here ;-). I would also appreciate getting a copy. Just sent you a PM with my email address. Thank you! __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein*

04-11-2011, 07:38 AM	#15
wamnram Senior Member Join Date: May 2010 Location: San Tan Valley, Arizona Posts: 211	Re: 36 window These might help??? __________________ Wayne Last edited by wamnram; 03-20-2019 at 07:23 PM.

04-11-2011, 08:47 AM	#16
Mart Senior Member Join Date: May 2010 Location: Solihull, England. Posts: 8,755	Re: 36 window Looks interesting - is that offset in the locating groove the mechanism that moves the window back before it moves it down? Mart.

04-11-2011, 01:49 PM	#17
wamnram Senior Member Join Date: May 2010 Location: San Tan Valley, Arizona Posts: 211	Re: 36 window Yes! __________________ Wayne