Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 05-30-2012, 10:29 AM   #1
modela-carb
Member
 
modela-carb's Avatar
 
Join Date: Nov 2010
Location: Elizabethton, Tn
Posts: 75
Default Carburetor Jet Testing Service

Sponsored Links (Register now to hide all advertisements)
After testing a lot of jets and posting some of the results here, I decided to offer a jet testing service for guys who don't need a complete rebuild but may just need their jets cleaned up, flow tested and fixed. Take a look at my add in the Model A swap section if you're interested.

Note on jet removal:
Remove the Cap jet (sits in the choke throat with the main jet) with a 5/16 wrench
Remove the Idle jet with a 9/32 wrench (found in most ignition sets)
__________________
Jim Adams

Last edited by modela-carb; 05-30-2012 at 01:57 PM.
modela-carb is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 05:48 AM.