|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-22-2021, 03:29 PM | #1 |
Senior Member
Join Date: May 2010
Location: Bethany, Ok
Posts: 382
|
Is the 32-39 light switch same as model A
Tired of fighting the repo 34 light switch I got. If it is the same as a Model A I can probably find a useable original. Thanks, Phil
|
03-22-2021, 03:35 PM | #2 |
Senior Member
Join Date: May 2010
Location: Above the gnat line in Georgia
Posts: 7,009
|
Re: Is the 32-39 light switch same as model A
I BELIEVE they are different, but someone will chime in with a for sure answer. I again BELIEVE I have a used genuine one, but I'll have to check and be sure. Gimme a day or two to check it out. LOL
__________________
Life is like a roll of toilet paper. The closer to the end, the faster it goes. It is better to be seen, than viewed. "We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm". |
Sponsored Links (Register now to hide all advertisements) |
|
03-22-2021, 05:24 PM | #3 |
Senior Member
Join Date: Feb 2014
Location: Harare Zimbabwe
Posts: 160
|
Re: Is the 32-39 light switch same as model A
Some of the later light switch assemblies are different from the Model A,
The model A light switch will turn 3 positions, side lights, headlight low beam and headlight high beam. The later switches only turn 2 positions, side lights and headlights, because they have a seperately mounted floor operated dip switch. |
03-22-2021, 06:19 PM | #4 |
Senior Member
Join Date: May 2010
Location: Bethany, Ok
Posts: 382
|
Re: Is the 32-39 light switch same as model A
Thanks
|
03-22-2021, 09:22 PM | #5 |
Senior Member
Join Date: May 2010
Location: NJ
Posts: 6,177
|
Re: Is the 32-39 light switch same as model A
Interesting about the Model A vs. '32 and above. I forgot about the foot stitch high beam set up.
|
03-22-2021, 10:37 PM | #6 |
Senior Member
Join Date: Aug 2010
Location: McMinnville, TN
Posts: 2,327
|
Re: Is the 32-39 light switch same as model A
Sponsored Links (Register now to hide all advertisements)
|
03-23-2021, 08:32 AM | #7 |
Senior Member
Join Date: May 2010
Location: Bethany, Ok
Posts: 382
|
Re: Is the 32-39 light switch same as model A
Well, as luck would have I have the "gold" one. Like you say it is poopy. When I finally get it together I can't get the contracts turn. I will be able to come up with a usable original one off a Model A. This is my first 34 build wasn't sure the were the same. Thanks, Phil
|
03-23-2021, 10:10 AM | #8 |
Senior Member
Join Date: Jan 2011
Location: sw minnesota
Posts: 4,567
|
Re: Is the 32-39 light switch same as model A
I usually take a file and smooth the brass buttons down to be flush with the plastic. you will still have the detente left, and they turn nice and smooth
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|