The Ford Barn

haag1332 · 11-14-2016, 07:32 PM

And I didn't mean that last comment to diminish anyone elses review of the socket in any way.

Bill Jr.

Tom Wesenberg · 11-14-2016, 09:28 PM

I thought I read that we were asked to not comment about receiving them. Yes, I did receive them a couple days ago and will take them to the clinic this Thursday. Hope I can remember who all wanted them, or I might have one or two left over. They are a very nicely machined socket, and will sure help with carb work. Thanks Bill

figment · 11-14-2016, 09:39 PM

Thanks Bill for a quality tool. Well worth the wait. Norm

haag1332 · 11-14-2016, 10:38 PM

Never said about saying you received them, just said not to divulge the ordering information.

Some people have gotten the information to place orders and have done so even they are not on the list for the first run of sockets I made.

I agreed to make sockets for the original interested parties. I will be making another run for others who are interested that didn't make it on the first list. The second run is already started, but I only have enough from the first run to satisfy the original interested parties. The rest will have to wait a bit.

I am not sure how to explain this better, lol, sorry.

Bill

haag1332 · 11-14-2016, 10:41 PM

Anyway Tom,

curious to hear your opinion since you seem to be rather technical, and have a great amount of knowledge on the subject.

Bill Jr.

haag1332 · 11-16-2016, 09:01 PM

Sponsored Links (Register now to hide all advertisements)

I currently have approximately 12 folks who have not yet replied back to my notices for receiving sockets. I have notified these folks thru FB email as well as FB pm's.

Please check your emails and pm's. Since some of the emails may not have been updated or have changed, I will send the same people pm's on here to see if I get a response.

I still have other notices to send over the next few weeks, so if you have not been notified do not worry, it will probably be sent very soon.

Bill

Mikeinnj · 11-18-2016, 11:42 AM

I received my socket yesterday via USPS 2 day delivery. I am really pleased with the quality and workmanship of this long needed tool. No more vice grips, cuss words etc. Thank you Bill for this fine contribution to our hobby. Mike in NJ (jburnsinnj)

Mitch//pa · 11-18-2016, 12:07 PM

Quote:

Originally Posted by mikeinnj

i received my socket yesterday via usps 2 day delivery. I am really pleased with the quality and workmanship of this long needed tool. No more vice grips, cuss words etc. Thank you bill for this fine contribution to our hobby. Mike in nj (jburnsinnj)

yeeeaaaaaaa

haag1332 · 11-18-2016, 05:51 PM

Thanks for the kind words guys.

Over 50 people have received sockets in the last couple of weeks. Many of which haven't posted anything here or contacted me directly.

I sure hope all of them feel the same way, lol. I haven't had a single negative comment yet and if I have done the job as well as I think I did, I don't expect to hear any.

Bill Jr.

Midwest Tin · 11-18-2016, 07:53 PM

Bill,
I received my socket and it looks great! Now I just have to use it. Thank you for all your efforts and time. Jim

haag1332 · 11-18-2016, 08:07 PM

Well let us know what you think when you use it Jim, we/I would love to hear your opinion.

Bill

Mafman · 11-18-2016, 09:15 PM

Hi Bill - I got mine as well. They look great, and I'm looking forward to trying them out. Thanks for all your work to make this happen!

Bill Cilker · 11-19-2016, 12:01 AM

Bill
How do I get on the order list?
Bill Cilker

C26Pinelake · 11-19-2016, 05:51 AM

what is the cost plus shipping or shipping included!

RW1930A · 11-19-2016, 09:39 AM

Received mine about a week ago. Very nice. Thanks for your efforts on these. Hope it is profitable for you and not a break even or loss.

Wis I had bought more to give to our club members. Thanks again

haag1332 · 11-21-2016, 08:13 PM

Guys, once again, please pay attention to the instructions I send you about ordering the socket. If you don't include your ford barn name, and it is nothing like your name used to ship, I can't verify who you are and ship in a timely manner.

Please try and follow the directions in order to make my life more simple and get your sockets in a timely manner.

Bill Jr.

Bill in NJ · 11-21-2016, 08:18 PM

Are there any more for sale and cost please ??

DaWizard · 11-22-2016, 03:19 PM

Well, I tell ya folks, I have over $14,000.00 worth of Snap-On tools in my box and don't have one of these. So, if it's not too much trouble, would you please add me to the list of those wanting one.

[email protected]

You notify me with email, I will give you the $30.00 for the socket and shipping to your email or PayPal account and you can ship one to me.

Thanks for the making of a quality product.

Y-Blockhead · 11-22-2016, 03:57 PM

Quote:

Originally Posted by haag1332

Please try and follow the directions in order to make my life more simple and get your sockets in a timely manner.

Bill Jr.

Bill's instructions are easy to follow.

Once your number comes up and you are notified, Bill gets your socket to you really fast. Bill has made us a quality product and I doubt he is going to retire off the proceeds so let's try to make his life easier. I keep mine in my Special Tool Tool Drawer.

Thanks again Bill for all you have done.

CarlG · 11-22-2016, 04:32 PM

Quote:

Originally Posted by Y-Blockhead

...Thanks again Bill for all you have done.

My sentiments exactly

11-14-2016, 07:32 PM	#381
haag1332 Senior Member Join Date: Feb 2015 Posts: 120	Re: carburetor 13/32 deep well socket And I didn't mean that last comment to diminish anyone elses review of the socket in any way. Bill Jr.

11-14-2016, 09:28 PM	#382
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: carburetor 13/32 deep well socket I thought I read that we were asked to not comment about receiving them. Yes, I did receive them a couple days ago and will take them to the clinic this Thursday. Hope I can remember who all wanted them, or I might have one or two left over. They are a very nicely machined socket, and will sure help with carb work. Thanks Bill

11-14-2016, 09:39 PM	#383
figment Senior Member Join Date: May 2010 Posts: 332	Re: carburetor 13/32 deep well socket Thanks Bill for a quality tool. Well worth the wait. Norm

11-14-2016, 10:38 PM	#384
haag1332 Senior Member Join Date: Feb 2015 Posts: 120	Re: carburetor 13/32 deep well socket Never said about saying you received them, just said not to divulge the ordering information. Some people have gotten the information to place orders and have done so even they are not on the list for the first run of sockets I made. I agreed to make sockets for the original interested parties. I will be making another run for others who are interested that didn't make it on the first list. The second run is already started, but I only have enough from the first run to satisfy the original interested parties. The rest will have to wait a bit. I am not sure how to explain this better, lol, sorry. Bill

11-14-2016, 10:41 PM	#385
haag1332 Senior Member Join Date: Feb 2015 Posts: 120	Re: carburetor 13/32 deep well socket Anyway Tom, curious to hear your opinion since you seem to be rather technical, and have a great amount of knowledge on the subject. Bill Jr.

11-16-2016, 09:01 PM	#386
haag1332 Senior Member Join Date: Feb 2015 Posts: 120	Re: carburetor 13/32 deep well socket Sponsored Links (Register now to hide all advertisements) I currently have approximately 12 folks who have not yet replied back to my notices for receiving sockets. I have notified these folks thru FB email as well as FB pm's. Please check your emails and pm's. Since some of the emails may not have been updated or have changed, I will send the same people pm's on here to see if I get a response. I still have other notices to send over the next few weeks, so if you have not been notified do not worry, it will probably be sent very soon. Bill

11-18-2016, 11:42 AM	#387
Mikeinnj Senior Member Join Date: May 2010 Location: Northern New Jersey Posts: 1,262	Re: carburetor 13/32 deep well socket I received my socket yesterday via USPS 2 day delivery. I am really pleased with the quality and workmanship of this long needed tool. No more vice grips, cuss words etc. Thank you Bill for this fine contribution to our hobby. Mike in NJ (jburnsinnj)

11-18-2016, 05:51 PM	#389
haag1332 Senior Member Join Date: Feb 2015 Posts: 120	Re: carburetor 13/32 deep well socket Thanks for the kind words guys. Over 50 people have received sockets in the last couple of weeks. Many of which haven't posted anything here or contacted me directly. I sure hope all of them feel the same way, lol. I haven't had a single negative comment yet and if I have done the job as well as I think I did, I don't expect to hear any. Bill Jr.

11-18-2016, 07:53 PM	#390
Midwest Tin Senior Member Join Date: May 2010 Location: Kenosha, WI Posts: 1,001	Re: carburetor 13/32 deep well socket Bill, I received my socket and it looks great! Now I just have to use it. Thank you for all your efforts and time. Jim

11-18-2016, 08:07 PM	#391
haag1332 Senior Member Join Date: Feb 2015 Posts: 120	Re: carburetor 13/32 deep well socket Well let us know what you think when you use it Jim, we/I would love to hear your opinion. Bill

11-18-2016, 09:15 PM	#392
Mafman Senior Member Join Date: Aug 2010 Location: Charlotte, NC Posts: 146	Re: carburetor 13/32 deep well socket Hi Bill - I got mine as well. They look great, and I'm looking forward to trying them out. Thanks for all your work to make this happen! __________________ James Johnson 1930 Tudor Sedan & 1939 Deluxe Fordor

11-19-2016, 12:01 AM	#393
Bill Cilker Senior Member Join Date: Apr 2011 Location: Milpitas, CA Posts: 398	Re: carburetor 13/32 deep well socket Bill How do I get on the order list? Bill Cilker __________________ Bill Cilker, Jr Unrestored 190A Victoria 45B, 160B & 189A Victoria Association President

11-19-2016, 05:51 AM	#394
C26Pinelake BANNED Join Date: May 2010 Location: Michigan / Ontario border, Sarnia, Ontario. 50 miles from Detroit and 150 from Toronto. Posts: 5,800	Re: carburetor 13/32 deep well socket what is the cost plus shipping or shipping included!

11-19-2016, 09:39 AM	#395
RW1930A Junior Member Join Date: Mar 2014 Location: Orangevale, California Posts: 10	Re: carburetor 13/32 deep well socket Received mine about a week ago. Very nice. Thanks for your efforts on these. Hope it is profitable for you and not a break even or loss. Wis I had bought more to give to our club members. Thanks again

11-21-2016, 08:13 PM	#396
haag1332 Senior Member Join Date: Feb 2015 Posts: 120	Re: carburetor 13/32 deep well socket Guys, once again, please pay attention to the instructions I send you about ordering the socket. If you don't include your ford barn name, and it is nothing like your name used to ship, I can't verify who you are and ship in a timely manner. Please try and follow the directions in order to make my life more simple and get your sockets in a timely manner. Bill Jr.

11-21-2016, 08:18 PM	#397
Bill in NJ Senior Member Join Date: May 2010 Posts: 1,159	Re: carburetor 13/32 deep well socket Are there any more for sale and cost please ??

11-22-2016, 03:19 PM	#398
DaWizard BANNED Join Date: Nov 2016 Location: Dizzyland Ca Posts: 332	Re: carburetor 13/32 deep well socket Well, I tell ya folks, I have over $14,000.00 worth of Snap-On tools in my box and don't have one of these. So, if it's not too much trouble, would you please add me to the list of those wanting one. [email protected] You notify me with email, I will give you the $30.00 for the socket and shipping to your email or PayPal account and you can ship one to me. Thanks for the making of a quality product. __________________ New owner of '28 Tudor Previously owned; '30 Sport Coupe '28 left brake ccPickup '31 SW Town Sedan '28 AA Stake Bed '30 Cabriolet '42 Super Deluxe 4door Sedan "If it don't fit, get a bigger hammer. If it breaks...... ya needed a new one anyway!!" Doing a good job here is like wetting your pants in a dark suit. It gives you a warm feeling, but nobody notices. Never pass up a bathroom Never neglect an erection Never trust a fart