|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-14-2019, 01:21 PM | #1 |
Senior Member
Join Date: Jul 2010
Location: Pennsylvania
Posts: 1,100
|
Water Pump Shaft Removal
Ok, so I'm rebuilding a water pump. I've unscrewed the packing nut, and I am trying to remove the shaft from the housing. It won't budge. (There isn't that collar at the front of the shaft to prevent fore/aft play.) The shaft spins freely in the bearings. I have it in a press but I don't want to put too much pressure on it fearing I'll crack the housing. I kroiled and heated but it won't budge. What am I missing?
|
08-14-2019, 02:13 PM | #2 |
Senior Member
Join Date: May 2010
Location: brentwood, ca
Posts: 4,244
|
Re: Water Pump Shaft Removal
Couple of pictures might help.
|
Sponsored Links (Register now to hide all advertisements) |
|
08-14-2019, 02:14 PM | #3 |
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 5,963
|
Re: Water Pump Shaft Removal
Did you remove the front bearing? Some modern pumps have a locked bearing.
|
08-14-2019, 03:39 PM | #4 |
Senior Member
Join Date: Jul 2010
Location: Pennsylvania
Posts: 1,100
|
Re: Water Pump Shaft Removal
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|