01-20-2021, 11:59 PM | #1 |
Senior Member
Join Date: Oct 2018
Location: n. cal [Monterey Bay]
Posts: 116
|
Fs ignitions
Does anyone have experience with this electronic ignition kit? In either 6v or 12v? Thanks, Jerbo
|
01-21-2021, 07:40 AM | #2 |
Senior Member
Join Date: May 2018
Location: Coral Springs, Florida
Posts: 547
|
Re: Fs ignitions
YES, it can be purchased as either!! I just love it, the FS People are great too !
|
Sponsored Links (Register now to hide all advertisements) |
|
01-21-2021, 08:26 AM | #3 |
Junior Member
Join Date: Dec 2018
Location: Humboldt, TN
Posts: 15
|
Re: Fs ignitions
I run an FS ignition and really like it. When i called to order it, they asked a lot of questions about my engine to make sure I got the right advance set up. They even sent along another set of springs in case I wanted to experiment with them. I have had absolutely no problem with it. I do carry an extra module in the car just to be safe.
|
01-21-2021, 10:02 AM | #4 |
Senior Member
Join Date: May 2010
Location: Durango CO
Posts: 1,309
|
Re: Fs ignitions
Been running them for 35 years on hot rods, boats, classics and Model A's. Follow the directions when you install it.
__________________
No restorable Model A's were harmed in the building of this truck! |
01-21-2021, 11:51 AM | #5 |
Senior Member
Join Date: May 2010
Location: North Carolina
Posts: 611
|
Re: Fs ignitions
First time in 50 years of Model A'ing I ever came home on a roll back, was when my electronic ignition failed. I hate them. lol
|
01-21-2021, 01:59 PM | #6 |
Senior Member
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,109
|
Re: Fs ignitions
Sponsored Links (Register now to hide all advertisements)
__________________
Alaskan A's Antique Auto Mushers of Alaska Model A Ford Club of America Model A Restorers Club Antique Automobile Club of America Mullins Owner's Club |
01-21-2021, 03:01 PM | #7 |
Senior Member
Join Date: May 2010
Location: Southern Upstate New York
Posts: 1,149
|
Re: Fs ignitions
Never had a problem with the electronic ignition from FS in 20,000 miles. Be sure to follow the directions to the letter. You'll need to run a dedicated ground wire from the distributor plate to the battery ground terminal. A lot of the failures occur because people short cut this detail.
__________________
AL in NY |
01-21-2021, 03:37 PM | #8 |
Senior Member
Join Date: Dec 2014
Location: Germantown,TN
Posts: 513
|
Re: Fs ignitions
Lots of information on FS here: https://www.fordbarn.com/forum/showt...ht=Fs-ignition
|
01-21-2021, 04:00 PM | #9 |
Senior Member
Join Date: Jan 2012
Location: Western North Carolina
Posts: 3,820
|
Re: Fs ignitions
Results may vary. The computer controlled electronic distributor on my Toyota works perfectly. My Model A came with the FS ignition. It may have been that the distributor was not set up correctly, but the stock distributor I replaced it with works a lot better. With the stock distributor there is no hesitation or carburetor wheezing when starting out from a stop. The engine starts easier. Plus, I just like the looks of the stock distributor and the fact that I can manually adjust the spark advance.
__________________
A is for apple, green as the sky. Step on the gas, for tomorrow I die. Forget the brakes, they really don't work. The clutch always sticks, and starts with a jerk. My car grows red hair, and flies through the air. Driving's a blast, a blast from the past. |
01-22-2021, 12:16 PM | #10 |
Senior Member
Join Date: Jun 2015
Posts: 1,414
|
Re: Fs ignitions
I had the 12 v FS zipper which was good except on hills with a H.C. head.; it wouldn't retard enough to prevent knocking. Some owners modify the internals to be able to rotate the dizzy assembly or change out the internal springs. The zipper is not pinned to the head. I removed it , and like others prefer the stock factory setup.
|
01-22-2021, 02:04 PM | #11 | |
Senior Member
Join Date: May 2010
Location: Durango CO
Posts: 1,309
|
Re: Fs ignitions
Quote:
I've had similar issues with the FS distributor that were quickly solved by using different spring rates to play with the advance and retard features of the unit. I have these distributors on both A's and I've tweeked the springs on both of them. I fully understand those that want to keep their A's just as they came off the assembly line. By the same token bad mouthing an aftermarket product based on a single usage is not always right. As I've posted, been running Per-Lux Ignitors, Petronix Ignitions and FS ignitions (all the same thing) for 35 years and the only failure was caused by me not following directions. Latest installation was a year ago on my '76 Jaguar XJ6c and it runs great. Too, if you're not running the proper coil, you're asking for trouble.
__________________
No restorable Model A's were harmed in the building of this truck! |
|
01-23-2021, 10:09 AM | #12 |
Senior Member
Join Date: Sep 2017
Location: Mint Hill, North Carolina
Posts: 386
|
Re: Fs ignitions
|
01-24-2021, 12:14 PM | #13 |
Senior Member
|
Re: Fs ignitions
I know many folks who run the FS ignition. They are always happy with the FS until they fail on a tour. Most Model Aers are not familiar with the FS system and are of no help when a FS failure occurs. However, with the stock dissy, most people can be of help during a breakdown. I run a stock dissy with a timed spare dissy under the seat. I had a condenser fail on my way to the 2018 MAFCA convention. Swapped the dissy and was back on the road in five minutes. I replaced the condenser when I came home. The stock dissy with a spare dissy is a fool proof system... JMHO
|
01-24-2021, 12:23 PM | #14 |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,486
|
Re: Fs ignitions
Can I ask the question 'why' you are looking at an electronic ignition kit? What is it you are trying to accomplish?? I am not saying you are wrong, ...just asking why.
|
01-24-2021, 12:28 PM | #15 |
Senior Member
Join Date: May 2010
Location: Southern Upstate New York
Posts: 1,149
|
Re: Fs ignitions
Dick M: so is the FS with a spare module.
__________________
AL in NY |
01-24-2021, 01:26 PM | #16 |
BANNED
Join Date: Dec 2019
Posts: 1,196
|
Re: Fs ignitions
The biggest reason for the Petronix is adaptive dwell, the hall effect impulse is modulated to provide consistent coil soak.
Many model A owners don't realize the ground path Ford used to complete the circuit was through the engine pans. Once removed, chassis grounding becomes dependent on connections not designed for it, like the drive shaft trunnion and front engine mount. Running a dedicated ground strap to the transmission provides the path needed, without it the petronix will burn..the rest of your electrical system will last longer and function better as well. |
01-25-2021, 04:54 PM | #17 | |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,486
|
Re: Fs ignitions
Quote:
Also, with that said, how 'hot' (-i.e.: intense) does the spark need to be to ignite a low compression mixture at relatively slow RPMs (-under 3,000 rpm)?? Does a 44,000 volt coil provide a performance advantage over a 30,000 volt coil if both coils provide the fuel mixture to be burned completely?? It is my opinion that with better quality points, condensers, and the improved Stipe ignition cam available to us today, ...and used in a stock distributor, in reality, the electronically controlled Ignitor really doesn't add any more horsepower or provide any performance gain. Does your experiences counter this?? |
|
01-25-2021, 06:52 PM | #18 |
BANNED
Join Date: Dec 2019
Posts: 1,196
|
Re: Fs ignitions
Negative,a properly maintained Kettering system works as well. My basis is the electronic system does the maintenance for me. Consistent operation of the ignition system also extends the life of components.
As for relevance I'm splitting hairs,performance,especially with manual spark advance, lies purely with the operator. |
01-26-2021, 09:52 AM | #19 |
Senior Member
Join Date: May 2010
Location: Ft. Worth
Posts: 1,006
|
Re: Fs ignitions
Love my FS distributor. Wouldn't be caught without it. We have them in all the cars and they work flawlessly. They fail when they aren't set up correctly. I carry a spare module for emergencies but in 40,000 miles on my sedan that's had it the longest, i've never needed it.
__________________
Cowtown A's |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|