The Ford Barn

Walt Dupont--Me. · 04-12-2016, 06:33 AM

Want to bye set of 6 new 3/8 pressure plate bolts that bolt PP to 50 Merc flywheel. Would Roy Nacewicz have them? How do i get in touch with him? Thanks Walt

JSeery · 04-12-2016, 06:41 AM

Here is a link to his site: http://fordscript.com/ford_bolts/products.html

P.O. BOX 544 Carleton, MI 48117

Mon - Thursday 9:00 AM - 11:00 PM Eastern Time

Fri - Sat - Sun 9:00 AM - 5:00 PM Eastern Time

Phone: 734-654-9450

Fax: 734-654-9530

skidmarks · 04-12-2016, 06:43 AM

chevy used 3/8 pressure plate bolts. last time I bought them was at NAPA

Tony, NY · 04-12-2016, 06:52 AM

These might work http://www.summitracing.com/parts/ar...2201/overview/
Also from another thread http://cgfordparts.com/ufolder/fordp...umber=350433-S

51 MERC-CT · 04-12-2016, 07:15 AM

Last time I needed a few I cut down some 1-1/2" long grade 8's to duplicate the originals.

Ol' Ron · 04-12-2016, 07:25 AM

Sponsored Links (Register now to hide all advertisements)

Good info, I need them too.

bluardun · 04-12-2016, 08:21 AM

Speedway sells them as Chevy pressure plate bolts. Same as the Merc. They are special.

04-12-2016, 06:33 AM	#1
Walt Dupont--Me. Senior Member Join Date: May 2010 Location: Gardiner Me. Posts: 4,200	3/8 pressure plate bolts for 50 merc. Want to bye set of 6 new 3/8 pressure plate bolts that bolt PP to 50 Merc flywheel. Would Roy Nacewicz have them? How do i get in touch with him? Thanks Walt

04-12-2016, 06:41 AM	#2
JSeery Member Emeritus Join Date: Nov 2012 Location: Wichita KS Posts: 16,132	Re: 3/8 pressure plate bolts for 50 merc. Here is a link to his site: http://fordscript.com/ford_bolts/products.html P.O. BOX 544 Carleton, MI 48117 Mon - Thursday 9:00 AM - 11:00 PM Eastern Time Fri - Sat - Sun 9:00 AM - 5:00 PM Eastern Time Phone: 734-654-9450 Fax: 734-654-9530

04-12-2016, 06:43 AM	#3
skidmarks Senior Member Join Date: Aug 2010 Location: newark, delaware Posts: 3,735	Re: 3/8 pressure plate bolts for 50 merc. chevy used 3/8 pressure plate bolts. last time I bought them was at NAPA

04-12-2016, 06:52 AM	#4
Tony, NY Senior Member Join Date: May 2010 Location: Capital of Corruption , NY Posts: 811	Re: 3/8 pressure plate bolts for 50 merc. These might work http://www.summitracing.com/parts/ar...2201/overview/ Also from another thread http://cgfordparts.com/ufolder/fordp...umber=350433-S

04-12-2016, 07:25 AM	#6
Ol' Ron Senior Member Join Date: May 2010 Location: Chester Vt Posts: 8,857	Re: 3/8 pressure plate bolts for 50 merc. Sponsored Links (Register now to hide all advertisements) Good info, I need them too.

04-12-2016, 08:21 AM	#7
bluardun Senior Member Join Date: May 2010 Location: Tucson, Az. Posts: 322	Re: 3/8 pressure plate bolts for 50 merc. Speedway sells them as Chevy pressure plate bolts. Same as the Merc. They are special.