The Ford Barn

Jack1937fordpu · 02-03-2018, 11:53 AM

On my 1937 Ford pickup I am trying to remove the pinion and race from the rear end housing. I have disassembled all parts except the pinion. I am having trouble removing the pinion. Please help if you can-919-427-7480.
Thanks Jack

GaryU. · 02-04-2018, 11:21 AM

Bringing this back to the top for Jack. Hope he's gotten responses already but if not thought it might help to post it again. Jack is working on a 37 pickup that is in his avatar photo and I recently sent him a good used ring and pinion that he had posted a wanted ad in the Swap section.

alanwoodieman · 02-04-2018, 12:02 PM

pretty sure there was a post recently showing ways to remove the pinion from the housing-- using a press is the easy way to do it. some times a little heat to housing also helps during the pressing

JM 35 Sedan · 02-04-2018, 12:46 PM

There have been quite a few "how to do" posts done here on the Barn, plus tech articles written and posted here and on the HAMB. Some searching in the archives should bring these up.

skidmarks · 02-04-2018, 02:28 PM

Sponsored Links (Register now to hide all advertisements)

Short bottle jack and a 3/8 nut on the pilot of the pinion will push it out.

02-03-2018, 11:53 AM	#1
Jack1937fordpu Senior Member Join Date: May 2011 Location: Leland, NC Posts: 135	Need Help with 1937 Ford PU rear end pinion removal On my 1937 Ford pickup I am trying to remove the pinion and race from the rear end housing. I have disassembled all parts except the pinion. I am having trouble removing the pinion. Please help if you can-919-427-7480. Thanks Jack

02-04-2018, 11:21 AM	#2
GaryU. Senior Member Join Date: May 2010 Location: Beaver Dam, Wisconsin Posts: 821	Re: Need Help with 1937 Ford PU rear end pinion removal Bringing this back to the top for Jack. Hope he's gotten responses already but if not thought it might help to post it again. Jack is working on a 37 pickup that is in his avatar photo and I recently sent him a good used ring and pinion that he had posted a wanted ad in the Swap section.

02-04-2018, 12:02 PM	#3
alanwoodieman Senior Member Join Date: May 2010 Location: upstate SC Posts: 2,963	Re: Need Help with 1937 Ford PU rear end pinion removal pretty sure there was a post recently showing ways to remove the pinion from the housing-- using a press is the easy way to do it. some times a little heat to housing also helps during the pressing

02-04-2018, 12:46 PM	#4
JM 35 Sedan Senior Member Join Date: May 2010 Location: Near Rising Sun, Maryland Posts: 10,858	Re: Need Help with 1937 Ford PU rear end pinion removal There have been quite a few "how to do" posts done here on the Barn, plus tech articles written and posted here and on the HAMB. Some searching in the archives should bring these up. __________________ *John* *"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein*

02-04-2018, 02:28 PM	#5
skidmarks Senior Member Join Date: Aug 2010 Location: newark, delaware Posts: 3,735	Re: Need Help with 1937 Ford PU rear end pinion removal Sponsored Links (Register now to hide all advertisements) Short bottle jack and a 3/8 nut on the pilot of the pinion will push it out.