|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-29-2016, 10:25 AM | #1 |
Senior Member
Join Date: Sep 2011
Posts: 106
|
Ignition Switch
I recently had trouble trying to install a newly purchased switch from Mac's because it was to deep. I have a very early canadian 28 tudor that seems to have many differences than other early 28's. I found a switch from WAYTEC INC, Chanhassen MN 55317 that fits perfectly.. I've included the specs for this switch. I hope this might help others with this problem.
|
09-29-2016, 07:47 PM | #2 |
Senior Member
Join Date: Dec 2014
Location: Shawnee, Ok
Posts: 3,471
|
Re: Ignition Switch
Since nobody will reply, I guess I will...Thank you for the tip.
I had issue with a switch myself, they can be a booger.
__________________
Keith Shawnee OK '31 SW 160-B |
Sponsored Links (Register now to hide all advertisements) |
|
09-29-2016, 08:57 PM | #3 |
Senior Member
Join Date: May 2010
Location: So Minn
Posts: 1,565
|
Re: Ignition Switch
Thanks for the info. I hadn't heard of this supplier but I do get to Chanhassen occasionally. I will have to check it out.
Is this the switch? https://www.waytekwire.com/item/4417...ition-Switch-/ |
09-29-2016, 09:36 PM | #4 |
Senior Member
Join Date: May 2010
Location: So Cal
Posts: 8,753
|
Re: Ignition Switch
The link posted above says it needs a 3/4" hole.
Bob |
09-29-2016, 10:10 PM | #5 | |
Senior Member
|
Re: Ignition Switch
Quote:
It is a possibility that they will re source the switch to the one you mention if enough people let them know of problems.
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
|
09-30-2016, 01:23 AM | #6 | |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Ignition Switch
Sponsored Links (Register now to hide all advertisements)
Quote:
I wouldn't screw up original parts to make a misfit part fit. |
|
09-30-2016, 03:27 PM | #7 |
Senior Member
Join Date: Sep 2011
Posts: 106
|
Re: Ignition Switch
Yes that is the switch in post # 3 and no I did not have to alter the hole in the dash either. It is good value for the switch.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|