Front motor mounts 32-36

[Walt Dupont--Me.]

How do I tell the year on the 32-36 mounts? I know there is a little differance on the angle where the hose goes on. Is there a cast no, on the mount? Thanks Walt

[bobH]

some have cast number, some do not. I've got a pair of 33-34, and one has the cast number, the other does not. Of course, 32 is unique, and is easily identified just by looks. 35-36 could look similar to 33-34, and I can't help with visual features. Maybe deuce-lover? 32 is unique because 32 has the separate 'strut' for the motor mount, and there is NO mount built into the water inlet. 33-36 all have a motor mount built into the water inlet.
I think there is an exception for early 33. David G would be the one to address that.

[bobH]

Here are 33-34 mounts, in case this helps any....

[Don Rogers]

Here are the 35 and 36 engine mounts.

[Walt Dupont--Me.]

Great pic guys, I'll check mine tomorrow. Thanks. Walt

[DavidG]

Sponsored Links (Register now to hide all advertisements)

The first photo is of the three known varieties for '32 V-8s. In the second photo, bottom center, is the early '33 version used with the early front cross member with 12" spacing between the center lines of the motor mount insulators on the cross member. It is shown upside down.