The Ford Barn

fordf1trucknut · 01-04-2018, 02:26 PM

I bought a cab and bed off a fellow ford barn member and am in the process of fixing up the repairs to my standards.

I have the back of the cab all done and am ready to attach it to the subrails but would like to know how it was done originally before I screw something up.

Bob C · 01-04-2018, 03:52 PM

Here are some pictures, not sure of what area you need.

Bob

fordf1trucknut · 01-04-2018, 04:01 PM

I the inner portion... I know the triangular brackets rivit to the subrails but don't know if they get welded to the channel that the wood goes,into??

fordf1trucknut · 01-04-2018, 04:21 PM

I am assuming the bottom flange of the back,panel gets spot welds to the bottom of the subrails channel. But not sure if the triangular pieces that slip inside the wood channel get welded??

Bob C · 01-04-2018, 04:33 PM

These threads by Flop may help. https://www.fordbarn.com/forum/showthread.php?t=126736

https://www.fordbarn.com/forum/showthread.php?t=86886
Also look at his other threads.https://www.fordbarn.com/forum/searc...archid=9804135

Bob

fordf1trucknut · 01-04-2018, 04:56 PM

Sponsored Links (Register now to hide all advertisements)

I tried looking though them.... Can't see any of the pics except a handful.

1930-Pickup · 01-04-2018, 05:30 PM

Hope these photos will help.
There is a shim shoved between the triangular bracket and the rail...that's there to stop a squeak.

fordf1trucknut · 01-05-2018, 12:46 PM

Thanks.... Still hard to tell where it is welded....guess I will just have to use my judgment.

Bob C · 01-05-2018, 01:24 PM

I went and looked at my cab and there are the three rivets holding the bracket to the subrail and a few spot welds holding it to the cab back.

Bob

fordf1trucknut · 01-05-2018, 01:44 PM

Awesome thanks. So much!!!!

Vin-tin · 01-05-2018, 01:58 PM

Quote:

Originally Posted by fordf1trucknut

I the inner portion... I know the triangular brackets rivit to the subrails but don't know if they get welded to the channel that the wood goes,into??

Mine was only riveted. No welds.

01-04-2018, 02:26 PM	#1
fordf1trucknut Member Join Date: Jan 2014 Location: Somerset pa Posts: 98	How is the back of a 30 ccpu cab attach to the subrails? I bought a cab and bed off a fellow ford barn member and am in the process of fixing up the repairs to my standards. I have the back of the cab all done and am ready to attach it to the subrails but would like to know how it was done originally before I screw something up. __________________ 23 t touring 25 tt huckster 30 coupe 30 coupe (traditional hotrod) 31 pickup 38 standard 42 gpw (ford army jeep) 48 f-1 52 f-1 52 f-1 4x4 55 chevy 55 m38a1 56 Victoria 68 bronco 70 land rover 72 club wagon

01-04-2018, 04:01 PM	#3
fordf1trucknut Member Join Date: Jan 2014 Location: Somerset pa Posts: 98	Re: How is the back of a 30 ccpu cab attach to the subrails? I the inner portion... I know the triangular brackets rivit to the subrails but don't know if they get welded to the channel that the wood goes,into?? __________________ 23 t touring 25 tt huckster 30 coupe 30 coupe (traditional hotrod) 31 pickup 38 standard 42 gpw (ford army jeep) 48 f-1 52 f-1 52 f-1 4x4 55 chevy 55 m38a1 56 Victoria 68 bronco 70 land rover 72 club wagon Last edited by fordf1trucknut; 01-04-2018 at 04:22 PM.

01-04-2018, 04:33 PM	#5
Bob C Senior Member Join Date: May 2010 Location: So Cal Posts: 8,753	Re: How is the back of a 30 ccpu cab attach to the subrails? These threads by Flop may help. https://www.fordbarn.com/forum/showthread.php?t=126736 https://www.fordbarn.com/forum/showthread.php?t=86886 Also look at his other threads.https://www.fordbarn.com/forum/searc...archid=9804135 Bob

01-04-2018, 04:56 PM	#6
fordf1trucknut Member Join Date: Jan 2014 Location: Somerset pa Posts: 98	Re: How is the back of a 30 ccpu cab attach to the subrails? Sponsored Links (Register now to hide all advertisements) I tried looking though them.... Can't see any of the pics except a handful. __________________ 23 t touring 25 tt huckster 30 coupe 30 coupe (traditional hotrod) 31 pickup 38 standard 42 gpw (ford army jeep) 48 f-1 52 f-1 52 f-1 4x4 55 chevy 55 m38a1 56 Victoria 68 bronco 70 land rover 72 club wagon

01-05-2018, 12:46 PM	#8
fordf1trucknut Member Join Date: Jan 2014 Location: Somerset pa Posts: 98	Re: How is the back of a 30 ccpu cab attach to the subrails? Thanks.... Still hard to tell where it is welded....guess I will just have to use my judgment. __________________ 23 t touring 25 tt huckster 30 coupe 30 coupe (traditional hotrod) 31 pickup 38 standard 42 gpw (ford army jeep) 48 f-1 52 f-1 52 f-1 4x4 55 chevy 55 m38a1 56 Victoria 68 bronco 70 land rover 72 club wagon

01-05-2018, 01:24 PM	#9
Bob C Senior Member Join Date: May 2010 Location: So Cal Posts: 8,753	Re: How is the back of a 30 ccpu cab attach to the subrails? I went and looked at my cab and there are the three rivets holding the bracket to the subrail and a few spot welds holding it to the cab back. Bob

01-05-2018, 01:44 PM	#10
fordf1trucknut Member Join Date: Jan 2014 Location: Somerset pa Posts: 98	Re: How is the back of a 30 ccpu cab attach to the subrails? Awesome thanks. So much!!!! __________________ 23 t touring 25 tt huckster 30 coupe 30 coupe (traditional hotrod) 31 pickup 38 standard 42 gpw (ford army jeep) 48 f-1 52 f-1 52 f-1 4x4 55 chevy 55 m38a1 56 Victoria 68 bronco 70 land rover 72 club wagon