|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-23-2021, 08:13 PM | #1 |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,908
|
How difficult would it be to convert this water heater from 12V to 6V?
How difficult would it be to convert this water heater, which does *not* come with a switch, from 12V to 6V? (By the way, my Victoria has a 6V alternator with positive ground. The slim design *might* fit in the floor, behind the stick shift with the water pipes pointing up.)
https://www.amazon.com/dp/B08CZTNDP8...v_ov_lig_dp_it Would it just be a matter of replacing the fans? (I've searched, and I didn't find any fans that I thought would be suitable, but electricals are not my strong suit.) Would a Model A 6V battery and alternator have enough juice to power two 6v fans? Here is a unit that appears to come with a switch. https://www.amazon.com/dp/B07K2CSQQ3...v_ov_lig_dp_it Would that switch likely work with 12V and 6V? |
01-23-2021, 08:51 PM | #2 |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,908
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
This switch might work, but I'm still wondering about the fans.
https://smile.amazon.com/Motor-Gover...omotive&sr=1-2 |
Sponsored Links (Register now to hide all advertisements) |
|
01-23-2021, 08:59 PM | #3 |
Senior Member
Join Date: May 2010
Location: Southern Upstate New York
Posts: 1,160
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
I would look for a 6vDC to 12VDC convertor......Look in Amazon
__________________
AL in NY |
01-23-2021, 10:10 PM | #4 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
I suspect the only thing/s electric in that heater are the fans. There appear to be two of them so pull it apart and connect them in series.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
01-23-2021, 10:18 PM | #5 | |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,908
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Quote:
I have bought it yet. I’m still trying to think this through. Amazon doesn’t have the current draw on its web site as far as I can tell. What is the “normal” wire size for the Model A? 12 AWG? That would be sufficient for up to 20 amps, correct? (The heavier duty convert is only 10 amps.) DIGITEN DC 6V 5-11V to 12V 10A Step up Converter Regulator Waterproof Boost Power Module https://smile.amazon.com/dp/B019GY2F...ing=UTF8&psc=1 Sent from my iPhone using Tapatalk |
|
01-24-2021, 09:28 AM | #6 |
Senior Member
Join Date: Jan 2012
Location: Western North Carolina
Posts: 3,898
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Sponsored Links (Register now to hide all advertisements)
__________________
A is for apple, green as the sky. Step on the gas, for tomorrow I die. Forget the brakes, they really don't work. The clutch always sticks, and starts with a jerk. My car grows red hair, and flies through the air. Driving's a blast, a blast from the past. |
01-24-2021, 12:00 PM | #7 |
Senior Member
Join Date: Dec 2017
Location: Guthrie, OK
Posts: 1,144
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
The LED dimmer switch probably won't handle the fan current. Easiest to run it on 6V with a simple toggle switch. The second item you referenced includes a higher powered dimmer, which you certainly don't need.
A more important consideration is that the fan circuit may well be in common with the housing. Negative battery on the housing will short through the coolant directly to the engine's positive ground. If this is the case it can be remedied by either reversing the fan connections - reversing the air flow - or insulating the fan mounts from the housing. |
01-24-2021, 12:14 PM | #8 |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,508
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Likely all that it will do by powering with 6 volts is it will cut the speed in half. Try it on the bench with 6v and see if the motor gets excessively warm while running.
|
01-24-2021, 04:25 PM | #9 | |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,908
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Quote:
Here is a picture of the fans. They look like computer fans. To me, they don’t appear to grounded to the case. Sent from my iPhone using Tapatalk |
|
01-24-2021, 04:26 PM | #10 |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,908
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
|
01-24-2021, 04:54 PM | #11 | |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Quote:
Running it on 6 volts would drop the power of the fans to one quarter of what it was. I would not recommend it. Power is proportional to the square of the voltage so halving the volts reduces the power to 1/4.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
|
01-24-2021, 06:46 PM | #12 |
Senior Member
Join Date: Jan 2012
Location: Western North Carolina
Posts: 3,898
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
5 Volt fans computer fans are available on eBay. They could probably be run on 6 or 7 volts without any damage.
__________________
A is for apple, green as the sky. Step on the gas, for tomorrow I die. Forget the brakes, they really don't work. The clutch always sticks, and starts with a jerk. My car grows red hair, and flies through the air. Driving's a blast, a blast from the past. |
01-24-2021, 09:16 PM | #13 | |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,908
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Quote:
Again, electricals are not my wrong suit. Other than reduced air throughput, why would you not recommend running the 12V fans on 6V? (By the way, thanks for the post. I was thinking it would reduce the power to 1/2.) Sent from my iPhone using Tapatalk |
|
01-24-2021, 09:19 PM | #14 | |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,908
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Quote:
Thanks. I’ve been looking on Amazon too. I suppose it’s a roll of the dice on replacement fans. Computer fans are not really made to handle car radiator-style heat. Then, again, the fans that ship with the heater could have a short life as well. Sent from my iPhone using Tapatalk |
|
01-24-2021, 09:22 PM | #15 |
BANNED
Join Date: Dec 2019
Posts: 1,196
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
When comfort and covienience merges,a 12 volt system is the answer.Component cost is lower and the selection is better.
|
01-24-2021, 10:33 PM | #16 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
When the motor is running at 1/4 speed, it won't move much air and can be easy to stall. That can lead to a burnout.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
01-25-2021, 05:16 AM | #17 |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,908
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
|
01-25-2021, 05:18 AM | #18 | |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,908
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Quote:
Up to this point, I haven’t seen much of a compelling reason to convert to 12V. (My car normally starts on first crank on 6V.) But, I can see how 12V would be tempting. You are correct. Virtually everything I’ve found is for 12V. Sent from my iPhone using Tapatalk |
|
01-25-2021, 05:45 AM | #19 |
Senior Member
Join Date: May 2010
Location: VA
Posts: 1,410
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
This rheostat or another that is billed for auto fans would be better than an LED controller. https://www.amazon.com/Controller-Un...571361&sr=8-10
|
01-25-2021, 07:37 AM | #20 | |
Senior Member
Join Date: Oct 2019
Location: Stoneboro PA
Posts: 120
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Quote:
|
|
01-25-2021, 08:32 AM | #21 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 3,463
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
This is another argument for converting to 12V. All the modern goodies are 12V negative ground.
__________________
Bob Bidonde |
01-25-2021, 10:29 AM | #22 | |
Senior Member
Join Date: Dec 2017
Location: Guthrie, OK
Posts: 1,144
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Quote:
5V fans can be had, just be sure they're physically the same size. The heavy dimmer switch will keep the speed down at 7V, and they will last longer. |
|
Sponsored Links (Register now to hide all advertisements) |
|
01-25-2021, 10:31 AM | #23 |
Senior Member
Join Date: May 2010
Location: VA
Posts: 1,410
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
I was addressing the request in post #1 for a switch.
|
01-25-2021, 11:19 AM | #24 | |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,908
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Quote:
Thanks for the link. Sent from my iPhone using Tapatalk |
|
01-25-2021, 01:17 PM | #25 |
Senior Member
Join Date: Dec 2017
Location: Guthrie, OK
Posts: 1,144
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
This one rated to 6V -
https://www.amazon.com/RioRandTM-Upg..._t3_B07T35JDTR The fans in post #9 have plastic housings, which are probably insulative, but check with an ohmmeter to make sure. Fans don't draw much current; their labels will specify. |
01-25-2021, 01:44 PM | #26 | |
BANNED
Join Date: Dec 2019
Posts: 1,196
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Sponsored Links (Register now to hide all advertisements)
Quote:
Its not that 6v cant do the job, its the availability of components that limits you. heat, AC, music, seat heaters, lighting, GPS, just about any addition you want to do is available in 12v. As you add components you raise your ampacity requirements, the model a generator is good to 30a,most off the shelf 12v alternators are under 100 bucks and provide 60a at the minimum.. |
|
01-25-2021, 01:51 PM | #27 |
Senior Member
Join Date: Jan 2020
Location: SF Bay Area
Posts: 1,068
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
A solution that you might consider: I have a 12 V power brick with both 12V and USB outputs that I carry with me to power my 12V accessories (like charge my phone) rather than mess around with trying to convert accessories. No reason you could not rig an SAE adapter to the 12V input of the fans and connect to the brick. Not elegantly wired in, granted, but you'd only need your heater part of the season and it might be acceptable to just run a pigtail down to the floorboard. You can also jump the battery using the 12V in a pinch.
JayJay
__________________
JayJay San Francisco Bay Area ------------------------ 1930 Murray Town Sedan 1931 Briggs S/W Town Sedan |
01-25-2021, 06:04 PM | #28 | |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,908
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Quote:
Thanks for the link. Sent from my iPhone using Tapatalk |
|
01-25-2021, 06:11 PM | #29 | |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,908
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Quote:
Thanks for posting that picture. I think you posted it in the past on another thread, and I was thinking about hunting for it. By any chance, would you have an Amazon link to it? Sent from my iPhone using Tapatalk |
|
01-25-2021, 06:12 PM | #30 | |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,908
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Quote:
That’s an interesting thought. Sent from my iPhone using Tapatalk |
|
01-25-2021, 06:25 PM | #31 |
BANNED
Join Date: Dec 2019
Posts: 1,196
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
That's a custom design brother, I bought the pieces and figured the rest. The concept is simple, though in some places I ran multiple function off of one relay, for instance ignition, fuel pump and main relay to fire the fuse panel
|
01-25-2021, 08:03 PM | #32 |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,908
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Many of the parts I have found are advertised as 12V parts. However, for now, I think I'd like to stay with a 6V positive ground system and make smaller changes rather than make all of the bigger changes that would be required to convert to 12V. I'm not necessarily opposed to 12V in the future, but I recently purchased a new 6V horn, my 6V alternator works fine, my battery works fine, and my headlights work fine. For now, it doesn't make sense to replace a bunch of hardware that is working.
Based on the various responses to this thread, I think I have two viable paths to pursue when I purchase this heater (https://smile.amazon.com/dp/B08CZTND...v_ov_lig_dp_it) in the next couple of days or so. Please help me validate these ideas. I'm not very skilled with amps, wire gauges, etc., and I don't want start a wiring fire in my car. Plan A (run everything at 6V):
Plan B (add a 6V to 12V step up converter):
Am I at risk of overloading anything with either of these plans? Do I have circuit protection in the correct places? |
01-25-2021, 08:10 PM | #33 |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,908
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Thanks. You are WAY more skilled than I. :-)
|
01-25-2021, 08:18 PM | #34 |
Senior Member
Join Date: Jan 2012
Location: Western North Carolina
Posts: 3,898
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
I may be wrong, it has been many decades since I took electrical theory classes, but if the voltage is cut in half the fan speed will be cut by 1/4. Power is volts times current. I think the current is cut in half because the voltage is half and the voltage is half. So 1/2 times 1/2 is 1/4.
__________________
A is for apple, green as the sky. Step on the gas, for tomorrow I die. Forget the brakes, they really don't work. The clutch always sticks, and starts with a jerk. My car grows red hair, and flies through the air. Driving's a blast, a blast from the past. |
01-26-2021, 03:59 PM | #35 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
[QUOTE=Badpuppy;1977827]Power is proportional to the square of current. Fans will run about 1/2 speed.
See nkaminar's post at #34. Yes, power is proportional to current squared but consider this. Resistance is volts divided by current and remains constant. Power is voltage multiplied by current. Halve the voltage and the current is also halved (constant resistance). Looking at power in terms of current only, it is resistance by current squared. One half multiplied by one half is one quarter. The fan runs at 1/4 power.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
01-26-2021, 09:56 PM | #36 |
Senior Member
Join Date: May 2017
Location: Denver Area
Posts: 433
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Power = Amps X Volts (remember P=IE, it is a piece of pie!)
The minor disagreement with Synchro909 is that you are usually trying to maintain a given level of power, like a 5 watt light bulb. So, if you are trying to provide the same level of power at 6 volts instead of 12 volts, you must double the current. This is why the wire gauge in a 6 volt car is bigger than in a 12 volt car. The age old rule is that if you want to switch to 12 volts, your wiring is not a problem but all your light bulbs, etc must be changed. |
01-27-2021, 12:26 AM | #37 | |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,496
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Quote:
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
|
01-28-2021, 11:02 AM | #38 |
Senior Member
Join Date: Dec 2017
Location: Guthrie, OK
Posts: 1,144
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
I stand corrected for my fuzzy thinking: V/2 ~ P/4.
In my defense, (somewhat) axle friction and wind resistance will be reduced, and the motor will spin rather faster than expected. |
02-01-2021, 10:04 AM | #39 |
Senior Member
Join Date: Mar 2014
Location: Midland Park,N.J.
Posts: 1,108
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
I love LED lights how about a red LED next to the heater control switch make a small polished stainless plate and hang it from the bottom screws on the dash.
|
02-01-2021, 05:47 PM | #40 |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,908
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
The heater arrived over the weekend, but I’m going to wait for warmer temperatures before I start working with it.
Sent from my iPhone using Tapatalk |
02-02-2021, 10:21 AM | #41 |
Senior Member
Join Date: Oct 2014
Location: NE Iowa
Posts: 1,664
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Does an A have enough water pump pressure to circulate water through a heater core. I'm just curious as I've never thought about it.
|
02-02-2021, 04:04 PM | #42 | |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,908
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Quote:
I’ve been wondering about that as well. It looks like the Snyder’s hookup kit has a curved pipe that snags water in an effort to push it though the heater. https://www.snydersantiqueauto.com/P...earchByKeyword Sent from my iPhone using Tapatalk |
|
Sponsored Links (Register now to hide all advertisements) |
|
02-02-2021, 05:29 PM | #43 |
Senior Member
Join Date: Oct 2014
Location: NE Iowa
Posts: 1,664
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Thanks for the answer.
|
02-02-2021, 08:14 PM | #44 |
Senior Member
Join Date: Jun 2010
Location: Danvers, Ma.
Posts: 712
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Plan "C" might be getting an original Autolite manifold heater. They work very well.
|
02-02-2021, 08:48 PM | #45 | |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,908
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Quote:
Yeah, I’ve considered that, but I don’t want to cut the firewall. I’m hoping I can put a couple of heater hose holes in the wood floor, but the jury is still out on whether the water will actually circulate to the heater or not. When temperatures get warmer, I plan to check out fan speeding 6V and on the 12V converter. We’ll see where this project goes from there. Sent from my iPhone using Tapatalk |
|
02-05-2021, 05:31 PM | #46 |
Senior Member
Join Date: Dec 2016
Location: Sunrise Beach, Mo
Posts: 439
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Sponsored Links (Register now to hide all advertisements)
|
02-06-2021, 07:34 AM | #47 | |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,908
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Quote:
Thanks, I ordered one. Sent from my iPhone using Tapatalk |
|
02-06-2021, 08:18 AM | #48 |
Senior Member
Join Date: Jan 2012
Location: Western North Carolina
Posts: 3,898
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
My car came with a coolant powered heater in a box. It had been installed in the car before so the holes in the firewall were already there. I re-installed it but wanted to use the tap in the outlet neck instead of the adapter in the hose. So I make my own scoop by soldering a modified copper elbow into a brass pipe nipple. I have a thermostat, which is in the radiator hose. The heater works great even in the freezing temperatures we have had here recently. The car is insulated. It is a four door and the heat reaches the back seat. The heater is the boxy one available from the vendors. I put a ball valve in the line so that I can turn off the hot coolant to the heater in the summer.
I think there are different water pumps available that pump more coolant than others.
__________________
A is for apple, green as the sky. Step on the gas, for tomorrow I die. Forget the brakes, they really don't work. The clutch always sticks, and starts with a jerk. My car grows red hair, and flies through the air. Driving's a blast, a blast from the past. |
02-06-2021, 02:07 PM | #49 | |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,908
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Quote:
That’s interesting. Would you mind posting some pictures of how you have it mounted in the car and in the engine bay? Sent from my iPhone using Tapatalk |
|
02-07-2021, 10:06 AM | #50 |
Senior Member
Join Date: Dec 2016
Location: Sunrise Beach, Mo
Posts: 439
|
Re: How difficult would it be to convert this water heater from 12V to 6V?
Happy to suggest! Let us know how it works out!
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|