The Ford Barn

mrtexas · 07-01-2015, 02:45 PM

Anyone out there have an early 28 brake cross shaft spring to loan to Bert's Model As?

They have hinted to me they may reproduce some if one could be provided as a spring manufacturer is close to their Denver store.

DanK · 07-03-2015, 10:48 AM

I don't have a spring I can give them but maybe this is enough.

Rowdy · 07-03-2015, 11:01 AM

Sponsored Links (Register now to hide all advertisements)

I was able to use die springs from Danley Spring. If I remember right I used the green ones. I sourced them through the place I used to work. It was pretty hassle free. They were a flat wire spring instead of round wire, but were available in the correct dia and length. I used the ones with the lightest spring rate. Rod

07-01-2015, 02:45 PM	#1
mrtexas Senior Member Join Date: May 2010 Location: Sugar Land, TX Posts: 4,395	Early 28 brake cross shaft springs Anyone out there have an early 28 brake cross shaft spring to loan to Bert's Model As? They have hinted to me they may reproduce some if one could be provided as a spring manufacturer is close to their Denver store.

07-03-2015, 11:01 AM	#3
Rowdy BANNED Join Date: May 2010 Location: Gothenburg Nebraska Just off I-80 Posts: 4,893	Re: Early 28 brake cross shaft springs Sponsored Links (Register now to hide all advertisements) I was able to use die springs from Danley Spring. If I remember right I used the green ones. I sourced them through the place I used to work. It was pretty hassle free. They were a flat wire spring instead of round wire, but were available in the correct dia and length. I used the ones with the lightest spring rate. Rod __________________ Do the RIGHT thing - Support the H.A.M.B. Alliance!!!!