|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-08-2017, 07:52 AM | #1 |
Senior Member
Join Date: Jul 2010
Posts: 136
|
Source for Potvin 3/8?
Who sells Potvin super 3/8 cams and good quality adj. lifters????
|
06-08-2017, 07:58 AM | #2 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: Source for Potvin 3/8?
You can still get Johnson lifter direct from the supplier, they are the solid type.
Part number B 2032 / 125+0455 NOPI Div of Topline http://hylift-johnson.com/wp-content...talog_2014.pdf Last edited by JSeery; 06-08-2017 at 08:17 AM. |
Sponsored Links (Register now to hide all advertisements) |
|
06-08-2017, 08:22 AM | #3 |
Senior Member
Join Date: Jan 2011
Location: Central Ohio
Posts: 5,062
|
Re: Source for Potvin 3/8?
Send a message to the member named 'Pete' -- he has been grinding flathead cams longer than I've been alive (and I'm 58). He can regrind a stock cam core to the Potvin 3/8 grind - I've had a lot of flathead friends get cams from him . . . you'll be pleased with the quality of his work.
Ping me if you need help. B&S |
06-08-2017, 09:36 AM | #4 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 1,052
|
Re: Source for Potvin 3/8?
If you need the original Johnson's just contact me either with an e-mail: [email protected], or a P.M. here.
Occasionally we find the lifters are on back-order, it's rare but it has happened. With this in mind we try to keep a fairly large supply here at all times, so far, so good. Thanks, Gary in N.Y. P.S. Just arrived this week, couple hundred lifters and valve springs strictly for the Flatheads. Shots here show the "Topline" lifters brand and "Associated" valve springs!
__________________
http://www.stromberg-bulletin.com/me...berg-equipped/ Last edited by GOSFAST; 06-09-2017 at 01:31 AM. Reason: C |
06-08-2017, 06:39 PM | #5 |
Senior Member
Join Date: May 2010
Posts: 2,871
|
Re: Source for Potvin 3/8?
Are the Topline lifter made in China ?
|
06-08-2017, 08:07 PM | #6 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: Source for Potvin 3/8?
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|