The Ford Barn

50Poopbox · 01-05-2012, 10:56 PM

I need the linkage, springs and plate that bolt to the manifold on a y block for a ford-o-matic.

http://i976.photobucket.com/albums/a...KAGE1Small.jpg

HERES a picture i found of the linkage(gray part with a screw driver sticking out of it)on a car as you can see it has some springs and brackets that work together to make it shift right, the linkage bolts to the intake and firewall on a car i assume its the same thing on a truck but might be a little different

49merclover · 01-06-2012, 11:59 AM

got em what year?

50Poopbox · 01-07-2012, 11:43 AM

Im looking for a '59 F100. I believe the engine and trans are out of a '57. I dont imagine any of that should be different in those years, they are virtually the same truck.

easyissy · 01-15-2012, 01:46 PM

I might have one laying around. I replaced mine with a cable and used a mr gasket universal bell crank for the Fom kickdown rod. I couldnt get the original linkage to work right.

South of BC · 03-30-2012, 09:43 PM

I'm looking for the same, 1956 F100. Any of you still have it?

50Poopbox · 03-31-2012, 10:28 AM

Sponsored Links (Register now to hide all advertisements)

South of BC- I finally found mine. Make sure that you are getting it from a truck, a car linkage will not work. Good luck trying to track it down. If you need help with the setup let me know.

01-05-2012, 10:56 PM	#1
50Poopbox Junior Member Join Date: Jan 2012 Location: San Pedro Ca Posts: 3	Y Block to FOM linkages City: San Pedro State: Ca I need the linkage, springs and plate that bolt to the manifold on a y block for a ford-o-matic. http://i976.photobucket.com/albums/a...KAGE1Small.jpg HERES a picture i found of the linkage(gray part with a screw driver sticking out of it)on a car as you can see it has some springs and brackets that work together to make it shift right, the linkage bolts to the intake and firewall on a car i assume its the same thing on a truck but might be a little different

01-06-2012, 11:59 AM	#2
49merclover Senior Member Join Date: May 2010 Posts: 199	Re: Y Block to FOM linkages got em what year?

01-07-2012, 11:43 AM	#3
50Poopbox Junior Member Join Date: Jan 2012 Location: San Pedro Ca Posts: 3	Re: Y Block to FOM linkages Im looking for a '59 F100. I believe the engine and trans are out of a '57. I dont imagine any of that should be different in those years, they are virtually the same truck.

01-15-2012, 01:46 PM	#4
easyissy Junior Member Join Date: Dec 2011 Location: San Pedro, CA (So-Cal) Posts: 8	Re: Y Block to FOM linkages I might have one laying around. I replaced mine with a cable and used a mr gasket universal bell crank for the Fom kickdown rod. I couldnt get the original linkage to work right.

03-30-2012, 09:43 PM	#5
South of BC Junior Member Join Date: Sep 2011 Posts: 2	Re: Y Block to FOM linkages I'm looking for the same, 1956 F100. Any of you still have it?

03-31-2012, 10:28 AM	#6
50Poopbox Junior Member Join Date: Jan 2012 Location: San Pedro Ca Posts: 3	Re: Y Block to FOM linkages Sponsored Links (Register now to hide all advertisements) South of BC- I finally found mine. Make sure that you are getting it from a truck, a car linkage will not work. Good luck trying to track it down. If you need help with the setup let me know.