|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-05-2012, 10:56 PM | #1 |
Junior Member
Join Date: Jan 2012
Location: San Pedro Ca
Posts: 3
|
Y Block to FOM linkages
City:
San Pedro
State:
Ca
I need the linkage, springs and plate that bolt to the manifold on a y block for a ford-o-matic.
http://i976.photobucket.com/albums/a...KAGE1Small.jpg HERES a picture i found of the linkage(gray part with a screw driver sticking out of it)on a car as you can see it has some springs and brackets that work together to make it shift right, the linkage bolts to the intake and firewall on a car i assume its the same thing on a truck but might be a little different |
01-06-2012, 11:59 AM | #2 |
Senior Member
Join Date: May 2010
Posts: 199
|
Re: Y Block to FOM linkages
got em what year?
|
Sponsored Links (Register now to hide all advertisements) |
|
01-07-2012, 11:43 AM | #3 |
Junior Member
Join Date: Jan 2012
Location: San Pedro Ca
Posts: 3
|
Re: Y Block to FOM linkages
Im looking for a '59 F100. I believe the engine and trans are out of a '57. I dont imagine any of that should be different in those years, they are virtually the same truck.
|
01-15-2012, 01:46 PM | #4 |
Junior Member
Join Date: Dec 2011
Location: San Pedro, CA (So-Cal)
Posts: 8
|
Re: Y Block to FOM linkages
I might have one laying around. I replaced mine with a cable and used a mr gasket universal bell crank for the Fom kickdown rod. I couldnt get the original linkage to work right.
|
03-30-2012, 09:43 PM | #5 |
Junior Member
Join Date: Sep 2011
Posts: 2
|
Re: Y Block to FOM linkages
I'm looking for the same, 1956 F100. Any of you still have it?
|
03-31-2012, 10:28 AM | #6 |
Junior Member
Join Date: Jan 2012
Location: San Pedro Ca
Posts: 3
|
Re: Y Block to FOM linkages
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|