Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-01-2023, 10:42 PM   #1
Weaponsusmc
Junior Member
 
Weaponsusmc's Avatar
 
Join Date: Jan 2013
Location: Findlay Ohio
Posts: 27
Default Vicky rear garnish moldings

I have a 31 Victoria that's missing the rear garnish molding, does any other A rear molding fit?
Weaponsusmc is offline   Reply With Quote
Old 09-01-2023, 11:30 PM   #2
Phil Brown
Senior Member
 
Phil Brown's Avatar
 
Join Date: May 2010
Location: Santee Calif.
Posts: 509
Default Re: Vicky rear garnish moldings

I believe that there unique to that body style
But just saw these https://www.ebay.com/itm/16604551864...mis&media=COPY
Phil Brown is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 09-02-2023, 07:11 AM   #3
Weaponsusmc
Junior Member
 
Weaponsusmc's Avatar
 
Join Date: Jan 2013
Location: Findlay Ohio
Posts: 27
Default Re: Vicky rear garnish moldings

Thank you Phil, just need the back window.
Weaponsusmc is offline   Reply With Quote
Old 09-02-2023, 10:07 AM   #4
Phil Brown
Senior Member
 
Phil Brown's Avatar
 
Join Date: May 2010
Location: Santee Calif.
Posts: 509
Default Re: Vicky rear garnish moldings

the very back window just might be the same as some other models but I just dont know for sure
Phil Brown is offline   Reply With Quote
Old 09-02-2023, 02:55 PM   #5
Oldbluoval
Senior Member
 
Oldbluoval's Avatar
 
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,372
Default Re: Vicky rear garnish moldings

Back window frame same in slant fordor
Oldbluoval is offline   Reply With Quote
Old 09-02-2023, 06:16 PM   #6
Bill Cilker
Senior Member
 
Bill Cilker's Avatar
 
Join Date: Apr 2011
Location: Milpitas, CA
Posts: 398
Default Re: Vicky rear garnish moldings

Sponsored Links (Register now to hide all advertisements)
Technically speaking there are 2 slightly different rear window frames for a Victoria. There is one for a Leatherback and one for a Steelback. When I compared the two side by side, the only difference was that the opening on the wood side of the frame was slightly wider on the SB frame. I have not compared the SW sedan rear frame with a Victoria frame, but they are both 26" wide windows so they might be interchangeable as Oldbluoval says.
__________________
Bill Cilker, Jr
Unrestored 190A Victoria
45B, 160B & 189A
Victoria Association President
Bill Cilker is offline   Reply With Quote
Old 09-02-2023, 06:43 PM   #7
Oldbluoval
Senior Member
 
Oldbluoval's Avatar
 
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,372
Default Re: Vicky rear garnish moldings

Bill…
Good point on steel back and leatherback.
Not familiar with leatherbacks much.
Oldbluoval is offline   Reply With Quote
Old 09-03-2023, 09:03 AM   #8
Bob Bidonde
Senior Member
 
Bob Bidonde's Avatar
 
Join Date: May 2010
Location: Long Island, NY
Posts: 3,470
Default Re: Vicky rear garnish moldings

Bill, your comment re the back window frame is good stuff for The Bustle. Thanks for posting.
__________________
Bob Bidonde
Bob Bidonde is offline   Reply With Quote
Old 09-03-2023, 09:33 PM   #9
Weaponsusmc
Junior Member
 
Weaponsusmc's Avatar
 
Join Date: Jan 2013
Location: Findlay Ohio
Posts: 27
Default Re: Vicky rear garnish moldings

Thanks for all the information, nothing was adding up with my Vicky rear window, its 28 inches give or take. I called the fellow asked the previous owner, said the guy before him put a 50 ford pickup rear window in it.
Weaponsusmc is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:37 AM.