|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-07-2015, 05:36 PM | #1 |
Senior Member
Join Date: May 2010
Location: South East NJ
Posts: 3,398
|
Swollen Pot Metal Lock Cylinder Solution- Maybe...
So I have been playing with some Evaporust and my gas/ radiator caps.
I also happen to have my box of door handles open on the bench. So I throw in some stuff just for the heck of it. Two of the items were handles with frozen pot metal lock cylinders. As in no play and no twist motion. I rinsed off the locks and slipped a screwdriver in and found they had motion. The wafers inside also move. Now I do not know if this was just because of the Evaporust or maybe another reason. I was hoping those with frozen lock cylinders and Evaporust would throw them in for a couple of days and see if it helps. I am curious if this works or is just something that happened with the couple I happen to have. Please try it and report back. Thanks! |
12-07-2015, 06:50 PM | #2 |
Senior Member
Join Date: Oct 2013
Location: Syracuse,NY
Posts: 264
|
Re: Swollen Pot Metal Lock Cylinder Solution- Maybe...
Sponsored Links (Register now to hide all advertisements)
|
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|