The Ford Barn

Hunter · 02-25-2012, 01:25 PM

On a 29 coupe, are the bolt heads inside the running boards, or do they get inserted through the fenders first so that the heads of the bolt are in the fender wells?

I have seen this disussed before but could not find it using the search engine.

Thanks - Hunter

31Tudor · 02-25-2012, 05:47 PM

The head of the bolt would be on the fender side with the lw and nut on the running board side.

msmaron · 02-25-2012, 06:00 PM

does this help

Tom Wesenberg · 02-25-2012, 06:12 PM

As Mark pictured, the heads face the REAR on both ends of the running boards. It doesn't seem right to be this way on the front, but it is. I doubled checked my 28 Phaeton just to be sure.

31Tudor · 02-26-2012, 01:16 AM

Sponsored Links (Register now to hide all advertisements)

Oops sorry Hunter, 28 through Sept 30 the bolt head faced inward as was corrected by Marc and Tom. October 30 through 31 the bolt head faced outward.

02-25-2012, 01:25 PM	#1
Hunter Senior Member Join Date: May 2010 Location: Gaithersburg, Maryland Posts: 518	Direction of Running Board to Fender Carriage Bolts On a 29 coupe, are the bolt heads inside the running boards, or do they get inserted through the fenders first so that the heads of the bolt are in the fender wells? I have seen this disussed before but could not find it using the search engine. Thanks - Hunter

02-25-2012, 05:47 PM	#2
31Tudor Senior Member Join Date: May 2010 Location: North Carolina Posts: 611	Re: Direction of Running Board to Fender Carriage Bolts The head of the bolt would be on the fender side with the lw and nut on the running board side.

02-25-2012, 06:12 PM	#4
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Direction of Running Board to Fender Carriage Bolts As Mark pictured, the heads face the REAR on both ends of the running boards. It doesn't seem right to be this way on the front, but it is. I doubled checked my 28 Phaeton just to be sure.

02-26-2012, 01:16 AM	#5
31Tudor Senior Member Join Date: May 2010 Location: North Carolina Posts: 611	Re: Direction of Running Board to Fender Carriage Bolts Sponsored Links (Register now to hide all advertisements) Oops sorry Hunter, 28 through Sept 30 the bolt head faced inward as was corrected by Marc and Tom. October 30 through 31 the bolt head faced outward.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode