|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-10-2021, 12:23 PM | #1 |
Senior Member
Join Date: Feb 2011
Location: Southern Mass
Posts: 195
|
Water Pump Install
I’m in the process of placing a New Water Pump, Gasket , and lower Radiator Hose on my 47 Ford with a 59 AB Engine. What should I use on my new water Pump and gasket and hoses before installing? Stay Safe! Thank!
Bob |
08-10-2021, 01:38 PM | #2 |
Senior Member
Join Date: May 2010
Posts: 2,173
|
Re: Water Pump Install
Plenty of wheel bearing grease on the gasket surfaces. Also helps to smear some on the inside of the hose and its fittings
|
Sponsored Links (Register now to hide all advertisements) |
|
08-10-2021, 01:43 PM | #3 |
Senior Member
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,645
|
Re: Water Pump Install
Jack's advice is good. Some use gasket cement or some other sticky stuff, but what goes on must one day come off... Besides, there will be no leaks from that area anyway.
__________________
Alan |
08-10-2021, 06:28 PM | #4 |
Senior Member
Join Date: May 2010
Location: Southeastern, MA
Posts: 434
|
Re: Water Pump Install
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|