Kp 40 Ford ignition switch

[kp]

I need a picture of the ignition Switch for 40 Ford ,when I got the Car the lower part of switch was missing . Ordered new contacts but there appears to be some kind of switch body missing.Somebody got a picture of how contacts are contained on the switch ,I know there are two small screws that attach it to the steering lock but there must be something missing here . Thanks ,ole dumb me .

[mrfliboy]

http://www.fordbarn.com/forum/showpo...&postcount=207

This is from my 41 truck might help if the same

[Ken/Alabama]

Here's a picture of the one on my 39 Zephyr. It's basically the same.

[JSeery]

I'm not sure, but I think they are the same or very similar for 32 thru 40.

[Terry,OH]

Just the metal container, the movable contacts and the terminal plate. Take it all off the steering drop assemble the three parts together and then reassemble on the steering drop with the (2) 8-32 counter sink head screws.

[kp]

Sponsored Links (Register now to hide all advertisements)

JSerry ,yeah , I have this and the contact but contact fits on the opposite side of this and there seems to be something that holds the contact in place .Thanks

[kp]

Terry,OH I dont have the metal plate shown in your picture ,where can I get this part ? Allread have the two other parts . Thanks .

[4tcoupe]

I may have one, give me a day or two and I'll let you know.

[kp]

ok ,thanks 4tcoupe ,my e mail is [email protected]